Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Meadowdale
If your chimney is leaking, smoking, or the masonry on the outside of your house looks worse every winter, we handle chimney repair in Meadowdale with professional-grade materials and a written estimate before any work begins. We know this area’s housing well: the mid-century split-levels and ramblers with masonry fireplaces, the tall firs overhead, and the long damp season that works on brick and mortar year after year. Meadowdale homeowners call us because a chimney problem here is usually a moisture problem, and moisture doesn’t fix itself. Call (888) 545-1163. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Meadowdale Homeowners Call Chimney Sweep Everett for Chimney Repair
We’re a dedicated chimney specialist, not a generalist handyman who adds chimneys to a long list. That matters in Meadowdale because the repairs this climate calls for – relining, crown work, waterproofing, flashing – are structural work on a critical home system, and they’re done with recognized industry materials rather than whatever a general contractor picks up at a supply house. One team handles your sweep, inspection, and repair, so there are no hand-off gaps between the person who diagnoses the problem and the person who fixes it.
Our technicians have up to 15 years of experience, and we work exclusively with brands chimney specialists trust: DuraFlex liner systems for full relining, HeatShield for structural liner restoration, and Copperfield for stainless components. We name the brands because the materials behind a repair matter as much as the labor. When we quote flashing or a rebuild in Meadowdale, you’ll know what’s going into your chimney before the work starts.
We serve Meadowdale directly along the Edmonds-Lynnwood corridor and up through the fir-shaded streets above Puget Sound, with fast dispatch from 7am to 7pm. The estimate is free and set per job by the written estimate, so the number you agree to is the number that holds. Chimney work is a safety trade. We treat it like one.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Liner Installation in Meadowdale
Chimney Liner Installation in Meadowdale is usually the right answer for an older masonry chimney whose original clay tile liner has cracked, flaked, or separated at the joints. When a flue liner fails, heat and combustion gases can reach the surrounding masonry, and that’s a real hazard: a trained professional should evaluate the flue before you burn again. We inspect with camera evidence you can see for yourself, then reline with a DuraFlex stainless system sized to your appliance. A typical reline in Meadowdale runs $1,800 to $4,500 depending on flue length, diameter, and whether insulation is added.
When a full reline makes sense
If the existing liner is spalling, has gaps at the joints, or the chimney has no liner at all, a full reline addresses the root cause rather than the symptom. It also corrects the cool-flue draft problems common in occasional-use fireplaces here.
Insulated versus uninsulated liners
An insulated liner keeps flue gases warmer, which reduces condensation on the liner walls in a damp climate. It’s often the difference between a chimney that drafts reliably and one that smokes back on cold starts.
Chimney Flashing Repair in Meadowdale
Chimney Flashing Repair in Meadowdale fixes the metal seal where the chimney meets the roof, and it’s one of the most common water-intrusion sources we find on homes in this area. The flashing and its sealant take the rain-driven weather off the roof plane, and when it rusts through or pulls away, water runs down the masonry and into the attic or ceiling below. Repair typically involves reworking the flashing, sealing the joints correctly, and checking the counter-flashing. A typical flashing repair in Meadowdale runs $350 to $850, and some roofs need the flashing rebuilt rather than resealed. We show you photos of the failure before recommending anything.
Where flashing fails first
The corners and the mortar joint where flashing tucks into the brick are the first places to let go. Sealant alone holds for a season or two; a proper rework lasts.
Flashing and crown together
A failed crown and failed flashing often show up at the same time, because both sit in the same weather. Fixing one without the other just moves the leak.
Trusted Brands We Service in Meadowdale
We work with recognized chimney brands because off-brand components undo good labor. In Meadowdale that means DuraFlex for stainless relining systems, Olympia Chimney for liner components and venting, Copperfield for stainless fittings, and HeatShield for structural liner restoration where a full reline isn’t required. For exterior work we lean on Gelco and Famco for weatherproofing and protection that holds up to the long damp season. We don’t claim to keep parts in stock locally – what we bring is access to the right components and a fast turnaround once the estimate is approved. You’ll know exactly which brand is going into your chimney and why.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Meadowdale Homes
- Spalling brick and cracked crowns. Prolonged dampness lets water freeze and expand inside the brick, pushing the faces off and opening cracks in the crown. Left alone, that water works its way down to the liner.
- Rusted dampers and smoke chambers. In occasional-use fireplaces, a damper that sits closed through the wet months corrodes and sticks. Poor draft and smoky backups usually follow.
- Damp needle blockages. The tall firs and cedars in Meadowdale yards drop needles onto caps and into flues every fall, and the wet air turns them into a damp, smoldering mass. It’s often mistaken for creosote.
- Deteriorated flue liners. The clay tile in 1960s-80s masonry chimneys has often cracked from years of moisture cycling. A camera inspection tells you whether it needs HeatShield restoration or a full reline.
Pricing for Chimney Repair in Meadowdale, WA
Honest numbers help you plan. A typical chimney waterproofing application in Meadowdale runs $300 to $700. Mortar repointing and tuckpointing typically run $500 to $1,500 depending on how much of the stack needs work, and spalling brick repair on a badly weathered chimney runs $800 to $2,500 when brick replacement is involved. A crown rebuild runs about $400 to $900. Full chimney rebuilding, when the structure has deteriorated badly, is a larger project priced individually. What moves the number is access, the height of the stack, how far the moisture damage has spread, and whether the roof flashing needs reworking at the same time. Nothing is recommended without camera evidence, and we tell you plainly when work can safely wait. The estimate is free, and the written estimate sets the final price.
We Also Serve Cities Near Meadowdale
We serve homeowners throughout Meadowdale and the surrounding communities, including Esperance, Clearview, Everett, and Indianola. If you’re just outside the Meadowdale area, call and we’ll confirm coverage. Our chimney repair team handles relining, flashing, crown work, and masonry repair across the region.
Serving Meadowdale, WA – Our Local Coverage Area
We serve Meadowdale and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Meadowdale
Once a year, even with light use. This climate builds moisture and needle debris far more than heavy creosote, so an annual inspection catches spalling masonry, a cracked crown, or a rusted damper before it turns into a structural repair. Call (888) 545-1163 for an exact quote – estimates are free.
That’s glazed creosote, a hard, tar-like deposit that bonds to the flue and resists a standard brush. It takes chemical treatment or mechanical removal by a trained technician, because glazed creosote ignites at lower temperatures than soot. We diagnose it on camera and tell you exactly what removal involves before we start.
Usually a cold, damp flue plus a partial blockage. After a wet season, the flue is chilled and heavy with moisture, and fir needles or damp debris on the cap cut the draft further. A sweep and inspection clears the blockage and confirms the flue is sound. Call (888) 545-1163 for an exact quote – estimates are free.
Flaking brick faces, visible cracks in the crown or mortar joints, rust stains, or water in the firebox all point to repair rather than cleaning. Those are moisture symptoms, and they don’t clear with a sweep. We confirm with camera inspection and photos you can see yourself.
Yes. For most older masonry chimneys here, a DuraFlex or Olympia Chimney stainless liner sized to the appliance is the right call, and where the existing liner is only partly deteriorated, HeatShield restoration can rebuild it in place. We explain the reasoning behind the recommendation before any work is approved. Call (888) 545-1163 for an exact quote – estimates are free.
If your chimney is smoking, leaking, or the masonry is crumbling, don’t wait for the first cold fire to find out why. Call (888) 545-1163. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The estimate is free, we work with professional-grade brands like DuraFlex and HeatShield, and we tell you honestly when a repair can safely wait.
Written by the team at Chimney Sweep Everett.