Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Everett Homeowners
An inspection is the part of chimney care that tells you what you actually own: how much creosote has built up, whether the liner is still sound, and whether the masonry and cap will hold up through another wet Everett winter. It’s the service homeowners call for when an insurer asks for documentation, when a flue starts smoking oddly, or when it’s simply been a few seasons and no one has looked. Our technicians have up to 15 years of experience, and we handle sweeps, inspections, and repairs as a full-service chimney specialist rather than a side job for a generalist contractor. Every inspection includes a camera look and a photo report you keep. We answer 24/7 at (888) 545-1163, with fast dispatch from 7am to 7pm, Sunday through Friday, and same-day visits are often possible in Everett.

Key Takeaways
- Inspections come in levels; which one you need depends on why you’re booking.
- You get camera evidence and photos, not just a verbal “your chimney is fine.”
- Nothing is recommended without documentation you can see for yourself.
- Cost depends on level and condition, and the written estimate sets the final price.
Fireplace Inspection
A fireplace inspection is a focused look at the firebox, damper, smoke chamber, and the first stretch of flue above the fire, and it’s the right call when your fireplace is the appliance you actually burn. You need one after a long stretch of use, before the first burn of the season, after any smoke spillage into the room, or when an insurer or a home sale asks for documentation. We check for cracked firebrick, a damper that no longer seals, gaps in the smoke shelf that push smoke back into the living room, and creosote glazed onto the firebox walls. We use professional-grade materials from names like HeatShield when a firebox or smoke chamber needs restoration, so the diagnosis and the fix come from one team. A fireplace inspection in Everett typically runs $150-$350 depending on what’s found and whether the flue is pulled in for a camera look. The written estimate sets the final price.
Firebox and Damper Checks
Firebrick cracks that look cosmetic can let heat reach the masonry behind them, and a damper that won’t close lets warm house air escape up the flue all summer. We check both as part of the fireplace look and tell you plainly whether each can wait or needs attention before the next fire.
Smoke Chamber Condition
The smoke chamber is the sloped space above the damper, and rough or deteriorated surfaces there collect creosote and catch sparks. We surface the chamber when it needs it using HeatShield, which smooths the transition so smoke moves up instead of curling into the room.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Inspection Services
Chimney inspection services cover the whole system, from the cap and crown down to the firebox, and they’re the reason to book a specialist instead of a generalist. You need them when you’ve just bought a home, when your flue has never been examined, when a wood stove or gas appliance was added, or when an insurance company wants proof the chimney is in serviceable condition. We work the levels properly: a basic annual look, a camera-level inspection when a change has happened or property changes hands, and a documented report you can hand to anyone asking. Because we also sweep and repair, the person who inspects your chimney is the person who can fix what they find, using brands like DuraFlex and Copperfield for liners and components. Chimney inspection services in Everett typically run $150-$500 depending on level, access, and roof conditions. The written estimate sets the final price.
Whole-System Walkthrough
We look at the exterior masonry, the crown, the cap and spark screen, the flashing where the chimney meets the roof, the liner, and the appliance connection as one system. Problems at the top often explain symptoms at the bottom, and vice versa.
Written Report With Photos
You get a written summary with photos of what we found and what it means, so you’re not relying on a verbal walkthrough you’ll forget by dinner. That report is what insurers and buyers usually want to see.
Chimney Flue Inspection
A chimney flue inspection is a close look at the inside surface of the flue itself, and it’s the part of an inspection that catches the problems you can’t see from the hearth. You need one when the flue hasn’t been examined in a while, when you’re switching fuels or appliances, after a chimney fire, or whenever draft problems or smoke smells show up in the house. We check for cracked or spalled clay tile, gaps at the joints, missing mortar, and whether the flue is sized correctly for the appliance venting into it. If the tile liner is failing, DuraFlex stainless liner systems let us address the cause rather than sweeping around it. A flue inspection in Everett typically runs $175-$400 depending on access and whether camera work is needed. The written estimate sets the final price.
Tile and Joint Integrity
Clay tile liners crack with heat cycling, and gaps at the joints let combustion gases reach the surrounding masonry. We map what we find so you know which sections are sound and which aren’t.
Flue Sizing and Draft
An oversized flue runs cold and smokes; an undersized one chokes the appliance. We check sizing against what’s venting into the flue and note whether draft problems trace back to the flue itself.
Chimney Fire
A chimney fire is a fire burning inside the flue, fed by creosote that has built up on the liner walls, and even a small one can crack tile or warp a liner without the homeowner noticing. You need an inspection after any suspected chimney fire, and sooner rather than later: heat damage to the liner is often invisible from below. We look for the signatures a fire leaves behind, including cracked tiles, warped or discolored metal, puffy creosote, and heat damage at the top of the flue. If the liner is compromised, we reline with DuraFlex systems so the flue is safe to use again. Post-fire inspection in Everett typically runs $200-$500 depending on the level of documentation needed. Signs to watch for include a roaring sound, popping, dense smoke, or an unusually hot flue pipe; if you suspect a fire, get everyone out and call the fire department before you call us.
What Heat Damage Looks Like
Creosote that has bubbled and turned puffy, cracked tiles, and discolored metal at the top of the flue are the classic heat-damage signs. We check each one with a camera so nothing is assumed.
Liner Replacement After a Fire
When a chimney fire has compromised the original tile, relining with a stainless DuraFlex system restores a continuous, sealed flue. We size the liner to the appliance so draft stays correct after the swap.
Level 2 Chimney Inspection
A Level 2 chimney inspection is the documented, camera-based inspection that goes beyond a basic visual check, and it’s the level most real-estate transactions and post-event situations call for. You need one when a home is being sold or bought, after a chimney fire or an earthquake, when you’ve changed the appliance or fuel type, or when a Level 1 look turns up something that needs a closer view. We run a camera through the flue, check all accessible portions of the chimney interior and exterior, and produce a written report with photos and findings. Brands matter here as much as anywhere, which is why we work with HeatShield, Olympia Chimney, and Copperfield for the components that show up in the repair plan. A Level 2 inspection in Everett typically runs $250-$500 depending on access and roof conditions. The written estimate sets the final price.
When Level 2 Is Required
Property transfers, appliance changes, and post-fire situations are the usual triggers for a Level 2. If you’re unsure which level you need, describe the situation and we’ll tell you plainly.
Camera and Documentation
We record what the camera sees and hand you a report with photos, findings, and repair recommendations. It’s documentation you can share without calling us back to explain it.
Chimney Leak
A chimney leak is water getting into the chimney system, usually at the crown, the flashing, or the masonry itself, and it’s the leading cause of chimney deterioration in a wet climate like Everett’s. You need help when you see water stains on the ceiling near the chimney, rust on the firebox or damper, crumbling mortar, or efflorescence (white powder) on the exterior brick. We track the leak to its source rather than sealing everything and hoping, checking the crown, the flashing and counter-flashing, the brick and mortar joints, and the cap. Weatherproofing and exterior protection with Gelco and Famco products is part of the fix, so the work addresses what you can’t see and what weather will eventually expose. Chimney leak diagnosis and repair in Everett typically runs $300-$900 depending on the source and extent. The written estimate sets the final price.
Chasing the Source
Water travels, so a stain on the ceiling doesn’t always point to the spot where the leak starts. We check the crown, flashing, masonry, and cap in sequence rather than guessing.

Weatherproofing the Exterior
Once the source is found, we treat the exterior with Gelco and Famco products that protect the masonry and keep water out. It’s the difference between patching a symptom and stopping the cause.
Chimney Camera Inspection
A chimney camera inspection runs a video camera down the flue to see what no one can see from the hearth, and it’s the most reliable way to catch liner damage before it becomes a repair. You need one whenever the liner’s condition is unknown, after a fire or a chimney leak, when you’re buying or selling a home, or when a draft or smoke problem has no obvious cause. We record the run, look for cracks, gaps, offsets, and blockages, and show you the footage so you can see exactly what we’re seeing. That footage is why our recommendations are evidence-based: nothing gets sold to you that isn’t in the video. A camera inspection in Everett typically runs $200-$450 depending on access and flue length. The written estimate sets the final price. If you want the cleaning and inspection together, our chimney sweep Everett service covers both in one visit.
What the Camera Reveals
The camera shows tile cracks, joint gaps, offsets, obstructions like nests and debris, and the true condition of the liner walls. It’s the clearest picture of the flue you can get without disassembly.
Footage You Keep
We record the run and share the footage with you so you have a record of the flue’s condition. When a repair is recommended, you can see in the video what we saw.
Brands We Service
We work with the brands chimney specialists trust because the materials behind a repair matter as much as the labor. Olympia Chimney and DuraFlex stainless liner systems are our go-to for relining work, and we know how each system handles heat cycling and the draft demands of different appliances. When a flue needs a sealed, continuous liner, those systems are what we install, not generic substitutes.
HeatShield is the product we use to restore fireboxes and smoke chambers at a structural level, and it’s a meaningfully higher bar than surface-level patching. Copperfield and Famco cover the components and exterior protection that finish the job, and Gelco handles weatherproofing so the masonry stays protected through Everett’s wet season. Whether you have Olympia Chimney, DuraFlex, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Smoke spilling into the room. A fireplace that backs up smoke is a draft or blockage problem, and it’s a reason to stop burning until someone looks at the flue. It usually points to an obstruction, a sizing issue, or a failing smoke chamber.
- A strong creosote or soot smell between uses. Air moving back down the flue brings creosote smells into the house. It’s often a sign of buildup or draft problems, and it’s worth checking before the next fire.
- Water stains, rust, or efflorescence. Moisture is getting into the chimney somewhere. Left alone, it works at the masonry and the liner, so it’s worth tracking down early rather than late.
- Cracked or crumbled masonry and a failing crown. Visible damage on the exterior lets water in and weakens the structure above the roofline. A crown that no longer sheds water sends it straight into the brick.
- A recent chimney fire or an odd hot smell while burning. Heat damage doesn’t always announce itself. A camera inspection after a fire tells you whether the liner is still safe to use.
Our Process, Step by Step
- 1
Book the visit and describe the issue. Tell us what you’re seeing, smelling, or hearing, and whether this is an annual check, a post-fire look, or a property sale. We match the inspection level to the reason.
- 2
Inspect the appliance and the exterior. We start at the appliance connection, then move to the firebox, damper, and smoke chamber, and check the cap, crown, flashing, and masonry from the roof where accessible.
- 3
Run the camera through the flue. A recorded camera run shows the liner’s true condition. We note cracks, gaps, blockages, and anything else that affects safe operation.
- 4
Review findings with you and show the evidence. We walk you through photos and footage, tell you what can safely wait, and describe what needs attention and why. Nothing is recommended without evidence you can see.
- 5
Provide a written estimate. The estimate lists the work and materials by name so you know what you’re paying for. Repairs use professional-grade brands, and the written estimate sets the final price.
How Much Does Chimney Inspection Cost in Everett?
A basic chimney inspection in Everett typically runs $150-$250, and the price climbs as the level of inspection and access increase. A camera-level or Level 2 inspection with a written report usually runs $250-$500, and when the visit turns into documented findings for a real-estate transaction or an insurer, expect the upper end of that range. Post-fire inspections and leak diagnosis typically run $200-$500 and $300-$900 respectively, depending on what’s found and how much repair is involved.
What affects the price: the inspection level, roof access and the pitch of the roof, whether a camera run is needed, how many flues the chimney has, and the condition of the system. A straightforward single-flue chimney with easy roof access costs less than a multi-flue chimney with a steep roof pitch or a liner that’s already been compromised.
How to avoid overpaying: ask for the level before you book, ask what’s included in the written report, and ask whether the inspection is priced separately from any repair. You shouldn’t be told you need thousands of dollars of liner or masonry work without camera evidence you can see for yourself, and if work can safely wait, we’ll say so.
What’s included: the appliance and firebox check, the exterior where accessible, a camera run, a written report with photos, and an estimate for any recommended repair. The estimate is free and the written estimate sets the final price, so call (888) 545-1163 to book.
Our Service Area Near Everett
We serve Everett and the surrounding communities, including Fobes Hill, Bunk Foss, Cathcart, Meadowdale, Clearview, Lake Cassidy, Three Lakes, Lochsloy, Sisco Heights, High Bridge, and Esperance. Most visits in the immediate area can be scheduled quickly, and same-day availability is often possible. If you’re in Fobes Hill or Bunk Foss, the drive is short and the visit books the same way it does in central Everett. Our Everett page covers the city more broadly, and our Fobes Hill and Bunk Foss pages cover the neighborhoods nearby.
Serving Everett, WA – Our Local Coverage Area
We serve Everett and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Inspection in Everett
A chimney inspection is an examination of the entire chimney system, from the cap and crown to the firebox and appliance connection, to confirm it’s safe to use. It includes a visual check of the accessible parts and, at Level 2, a recorded camera run of the flue. You get a written report with photos so you know the condition of the system and what, if anything, needs attention. Call (888) 545-1163 for an exact quote; estimates are free.
A basic inspection takes about 30-45 minutes, and a Level 2 with camera work usually runs 60-90 minutes. Time depends on access, the number of flues, and roof conditions. If we find something that needs a closer look, we’ll tell you before we spend the extra time. Call (888) 545-1163 for an exact quote; estimates are free.
A basic inspection typically runs $150-$250, and a Level 2 or camera inspection with a written report usually runs $250-$500. Post-fire and leak diagnosis visits typically run $200-$500 and $300-$900 depending on what’s found. The written estimate sets the final price. Call (888) 545-1163 for an exact quote; estimates are free.
Yes, we work with Olympia Chimney and DuraFlex liner systems, and we install them when a flue needs relining. We also work with HeatShield, Copperfield, Gelco, and Famco for restoration and exterior protection. If your chimney has Olympia Chimney or DuraFlex components, we know how those systems are sized and installed. Call (888) 545-1163 for an exact quote; estimates are free.
Same-day inspection is often possible in Everett, and we book visits within our dispatch window: fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday, and we answer the phone 24/7, so a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (888) 545-1163 for an exact quote; estimates are free.
We stand behind the work we do, and the written estimate spells out the scope and terms so you know what’s covered. We don’t make guarantees that haven’t been confirmed, so ask about the specific repair when we review your estimate. That way you know exactly what you’re getting. Call (888) 545-1163 for an exact quote; estimates are free.
Clear the hearth and the area in front of the fireplace, move fragile items away, and make sure we can get to the firebox and the roof access point. If you know the appliance’s make or model, have it ready, and let us know if you burn wood or gas. If you’ve had a fire or a leak, mention it when you book so we bring the right level of inspection. Call (888) 545-1163 for an exact quote; estimates are free.
Schedule Your Chimney Inspection Service in Everett Today
Book a chimney inspection in Everett with a team that shows you the evidence before recommending a repair. We answer 24/7 at (888) 545-1163, with fast dispatch from 7am to 7pm, Sunday through Friday, and same-day visits are often possible. You get a camera look, a written report with photos, and a free no-obligation estimate. Call today.
Written by the team at Chimney Sweep Everett.