Chimney Company in Clearview - One Flat Price, You See What We See

A flat-price sweep with a camera inspection and photo report included. If we find something that needs attention, you see the picture before you hear a price - and we will tell you when it can wait.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (888) 545-1163

Flat price quoted before we book

Work is performed by our local vetted partner.

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Estimates 💲 Upfront Pricing · Free Estimates
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Chimney Company in Clearview, WA

Chimney inspection in Clearview starts with a simple reality: the woods around here do more damage to a flue than the fire ever does. Fir needles, moss and damp winter air pack caps and screens long before creosote builds up inside the firebox, and stoves that only run during a power outage sit idle for months at a time. We’re a dedicated chimney specialist, not a roofing or HVAC outfit with a broom on the truck, and we handle the sweep, the inspection and the repair with the same team. Call (888) 545-1163 for a free estimate.

Call (888) 545-1163

Why Clearview Homes Are Different

Clearview sits in the Snohomish County lowlands, tucked east of the Everett-Seattle corridor and under heavy Douglas fir and cedar cover. That canopy does something specific to chimney systems: it fills caps with needles, grows moss across screens and keeps flues from drying out between burns. This pocket gets roughly 35 to 40 inches of rain a year, and a flue that stays cool and damp doesn’t shed creosote as powder. It glazes. Glazed, tar-like creosote is harder to brush and burns hotter than the fluffy stage, which is why a chimney that looks clean from the hearth room can still be a problem up top.

The housing stock shapes the work too. Most homes ringing the rural-residential edge of 98012 are 1970s to 2000s Pacific Northwest builds – split-levels and ramblers, many with brick, stone or factory-chimney fireplace assemblies. A large share also have a freestanding wood or pellet stove added later, and the occasional stove install was a homeowner job rather than a permitted one. We verify those against code rather than assume. Clearview also loses power in wind and ice storms most winters, and that’s its own pattern: the stove fires up for the first time in months, and the first thing we find is a cap packed solid with fir needles and a flue full of damp creosote from last season’s intermittent burning.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Our Main Clearview Services

Clearview homeowners mostly call us for two things: getting the flue cleared of what the woods push into it, and getting the chimney back into shape once that neglect shows up in the liner or the masonry.

Chimney Sweep in Clearview

A sweep here is usually less about a dirty firebox and more about the cap, screen and flue above it. Fir needles and moss collect on the cap through the wet months, and if they aren’t cleared, airflow drops and the stove starts smoking back into the room. We brush the flue, clear the cap, and pull out glazed creosote that brushing alone won’t touch. If your stove only runs during outage season, that’s exactly the kind of intermittent burning that leaves stubborn deposits behind. For the cleaning itself, see Chimney Sweep in Clearview.

Chimney Sweep in Clearview

Chimney Repair in Clearview

Repair work in Clearview tends to start where the wet climate ends. Damp flues, older clay-tile liners and factory chimneys that have gone years without service are where we find cracked tiles, deteriorated mortar joints and crown damage. We work with professional-grade materials from DuraFlex and Copperfield rather than generic parts, and the fix is aimed at the cause rather than the symptom. If that stove install someone added years back turns out to be vented wrong, that’s a repair conversation too. Details on Chimney Repair in Clearview.

Chimney Repair in Clearview
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (888) 545-1163

Chimney Inspection in Clearview

Chimney Inspection in Clearview

Chimney inspection in Clearview is the step that tells you what the woods and the weather have actually done to your flue. A 1970s rambler with a factory chimney and a wood stove added in the 2000s has two very different systems to check, and the wet Pacific Northwest climate means both hold moisture longer than the owners expect. We diagnose the full picture with Chimney Inspection work, from the cap down to the smoke chamber, and we show you what we find rather than just telling you about it. In a pocket where a winter windstorm can knock the power out and send everyone back to the stove, knowing the system’s condition before that first cold burn matters.

Chimney Flue Inspection

The flue is where the actual risk lives, and it’s the part of the system a homeowner can’t see from the hearth room.

Signs you need it

You need a flue inspection if the stove smells smoky when it’s not burning, if smoke rolls back into the room on startup, or if the chimney hasn’t been looked at since the last outage season.

What it costs in Clearview

A flue inspection typically runs $125 to $275 in Clearview, and a camera inspection combined with a sweep often lands in the $250 to $450 range.

How we do it

We run a camera down the flue, check the liner joints and any offsets, look for glazed creosote and moisture staining, and photograph what we find so you can see the same thing we do.

Level 2 Chimney Inspection

A Level 2 inspection covers everything a basic check does, plus the accessible parts of the chimney structure, and it’s the right call when something in the system has changed.

Signs you need it

A new stove or insert, a change of fuel, a chimney fire, a wind or ice storm that hit the stack, or a home sale is the usual trigger for a Level 2 look.

What it costs in Clearview

Level 2 inspection in Clearview is typically $275 to $550, and it’s the figure we quote upfront before booking the visit.

How we do it

We inspect the firebox, damper, smoke chamber, flue and the exterior stack, check clearances against code, and put the findings and photos in a written report.

What Chimney Inspection Costs in Clearview

These are typical ranges for Clearview, and your written estimate sets the final price.

Item Typical range in Clearview
Basic chimney inspection $125 – $275
Camera inspection with sweep $250 – $450
Level 2 inspection $275 – $550

Can a chimney inspection find a chimney fire I didn’t know I had?

Yes. A slow, smoldering chimney fire often leaves glazed creosote, cracked tiles or warped metal that only shows up on camera. That’s a strong reason to inspect after any season of heavy burning in Clearview.

Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (888) 545-1163

Do I need an inspection if my stove only runs during power outages?

Yes, and it’s easy to overlook because the stove looks unused. Intermittent burning in a damp climate is exactly what leaves glazed creosote behind, so a Clearview stove that fires up a few times each winter still needs checking. Call (888) 545-1163 for an exact quote – estimates are free.

Brands We Service in Clearview

We work with the brands chimney specialists trust, including Olympia Chimney, Famco, Copperfield and DuraFlex. We don’t stock parts or carry inventory, so the right component is ordered for your system once we’ve diagnosed it. That keeps the turnaround honest on relining and cap replacement jobs. See our brands for the full list of what we install and service.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Want to talk it through?Free estimate, price agreed before work starts
Call (888) 545-1163

Pricing for Chimney Company in Clearview, WA

Every price below is a typical Clearview range, not a quote. Your written estimate sets the final figure once we’ve seen the system.

Service Typical range in Clearview
Basic chimney inspection $125 – $275
Camera inspection with sweep $250 – $450
Level 2 inspection $275 – $550
Standard chimney sweep $150 – $350
Sweep with cap cleaning $200 – $400
Chimney cap replacement $250 – $650
Crown repair $350 – $900
Tuckpointing and mortar repair $400 – $1,200
Chimney relining (DuraFlex) $2,500 – $6,500
HeatShield liner repair $1,800 – $4,000

In Clearview, two things push price up more than anything else: how much of the cap and screen has to be cleared of needles and moss, and how far the flue has deteriorated under years of damp, intermittent burning. Relining sits at the top of the range because it’s a full structural fix, not a surface one. We agree the flat price with you before we book, and the written estimate is what you pay.

Neighborhoods We Serve in Clearview

We work across Clearview and the surrounding rural-residential edge of 98012, from the wooded lots where fir cover is heaviest to the more open properties closer to the corridor. The density of the tree canopy is what varies most block to block, and it’s the biggest factor in how packed a cap will be when we arrive. Response time is consistent across the area. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.

  • The wooded 98012 edge, where fir and cedar cover is heaviest
  • The rural-residential lots off the Clearview road corridors
  • Split-level and rambler properties ringing the lowland edges
  • Homes with freestanding wood or pellet stoves added after construction

Service Area – Cities Near Clearview

Clearview borders several communities we cover, and the chimney conditions shift with the tree cover from one to the next. We work in Cathcart, WA, where the rural lots see similar needle buildup, and in Meadowdale, WA to the west. Everett, WA is our primary service area, and we cover Esperance, WA as well. Wherever you are in this part of Snohomish County, the inspection starts the same way and the estimate is free.

Across the region we also keep a full chimney sweep resource on Chimney Sweep Everett if you want to understand what a cleaning involves before booking.

Serving Clearview, WA – Our Local Coverage Area

We serve Clearview and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Chimney Company in Clearview

Ready to get started? Free estimates in Clearview
Call (888) 545-1163

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney cleaning pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Clearview Customers Say

★★★★★ 4.9 from 9+ reviews

"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."

- Brooke Padgett

"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."

- Wade Rhodes

"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."

- Heather Quinn

How It Works in Clearview

Getting your chimney cleaning project started is simple.

1

Call or Request a Free Estimate

Tell us about your chimney cleaning project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

Request a Free Estimate

Tell us what's going on in Clearview. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7