Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Everett, WA
Chimney inspection in Everett starts with the weather, not the firebox. This is one of the wettest marine climates in the country, and the housing stock runs from 1890s mill-worker homes near the waterfront to 1970s ramblers with wood stoves out south and east. That mix means we look for water damage and glazed creosote as often as we look for simple soot. Our technicians have up to 15 years of experience, and every job starts with a free estimate. Call (888) 545-1163. We answer 24/7.
Why Everett Homes Are Different
Everett gets more than 45 inches of rain a year, most of it between October and April, and the marine air keeps humidity high the rest of the year too. Flues stay damp. Creosote absorbs that moisture and turns into a sticky glaze that clings to clay tile instead of flaking off. When a homeowner finally lights the stove after a long wet stretch, that glaze is what ignites.
The housing stock sets the second half of the problem. Original brick chimneys in the north end and downtown have been cycling wet and dry for a century, and many now show spalling brick and cracked mortar joints. In the south and east, 1950s through 1970s ramblers more often have prefab metal chimneys serving wood stoves. Those two systems fail in completely different ways, and a technician who doesn’t know which one they’re looking at will miss the real issue. Cold masonry chimneys also shed mortar after a wet winter, so what looks like a sweep call sometimes turns into a masonry conversation.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Everett Services
Most Everett homeowners call us about one of two things: a sweep before the burning season, or a repair after something has already gone wrong.
Chimney Sweep in Everett
A sweep here means more than brushing soot off the walls. Damp creosote glazes onto the flue in this climate, and it takes proper tooling to break it loose without cracking clay tile. We run a camera through the flue as part of the sweep so you can see the condition for yourself, and we show you photos before we recommend anything. On older brick chimneys near the waterfront, we’re also checking for mortar that’s gone soft and brick that’s started to spall. If you want the full breakdown, see Chimney Sweep in Everett.

Chimney Repair in Everett
Repair work in Everett splits into two broad categories: water damage and fire damage. Spalled brick, cracked mortar crowns, and failed flashing cause most of what we fix, because a century of wet-dry cycling is hard on original masonry. The rest is liner work after a chimney fire or years of glazed creosote. We use DuraFlex liner systems for full relining and HeatShield for structural liner repair, and we name those brands because the material behind a repair matters as much as the labor. More detail lives on Chimney Repair in Everett.

Chimney Inspection in Everett

Chimney inspection in Everett is a different job than it is in a dry inland city, and the housing era decides what we’re hunting for. In the 1890s to 1920s mill-worker and craftsman homes around the north end and downtown, original masonry chimneys with clay tile liners are the norm, and many carry glazed third-degree creosote plus mortar that’s gone soft from wet-dry cycling. In the 1950s to 1970s ramblers south and east, prefab metal chimneys and wood stove installations are more common, and those fail at joints and connections rather than in the masonry. A proper Chimney Inspection tells you which problem you actually have before you spend money on the wrong fix.
Fireplace Inspection
Signs you need it
You’re getting smoke spilling into the room, the fire draws poorly, or the fireplace hasn’t been looked at since you moved in.
What it costs in Everett
A fireplace inspection typically runs $125 to $250 in Everett, with the written estimate setting the final price.
How we do it
We check the firebox, damper, smoke chamber, and the first few feet of flue, then photograph what we find and walk you through it.
Chimney Flue Inspection
Signs you need it
You’ve had a chimney fire, the flue has visible cracking or missing tile, or the appliance has never drafted well.
What it costs in Everett
Flue inspection work typically falls between $150 and $300 in Everett, depending on access and how much of the flue needs camera work.
How we do it
We run a camera the full length of the flue, record the footage, and mark every crack, gap, or offset we find so you can see the same thing we do.
What Chimney Inspection Costs in Everett
| Item | Typical range in Everett |
|---|---|
| Fireplace inspection | $125 – $250 |
| Chimney flue inspection | $150 – $300 |
| Level 2 chimney inspection | $200 – $450 |
Do I need a Level 2 inspection if I’m selling my house?
A Level 2 inspection is the usual standard for a real estate transaction, and it’s also what you want after a chimney fire or a change of appliance. It covers the full flue with a camera, plus accessible portions of the attic and crawlspace. Call (888) 545-1163 for an exact quote; estimates are free.
Can you tell me if a chimney fire actually happened?
Often yes. A chimney fire leaves evidence: cracked or displaced flue tiles, warped dampers, and puffy or honeycombed creosote. We photograph what we find so you aren’t taking anyone’s word for it. Call (888) 545-1163 for an exact quote; estimates are free.
Brands We Service in Everett
Our repair and restoration work uses professional-grade materials from brands chimney specialists trust: DuraFlex for liner systems, HeatShield for structural liner repair, Olympia Chimney components, and Gelco and Famco for weatherproofing and exterior protection. We don’t stock parts, so turnaround depends on the material order. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Everett, WA
| Service | Typical range in Everett |
|---|---|
| Standard chimney sweep | $180 – $320 |
| Fireplace inspection | $125 – $250 |
| Chimney flue inspection | $150 – $300 |
| Level 2 chimney inspection | $200 – $450 |
| Crown repair | $250 – $600 |
| Chimney cap installation | $150 – $400 |
| Flashing repair | $250 – $550 |
| HeatShield liner repair | $1,200 – $2,800 |
| DuraFlex full relining | $2,000 – $4,500 |
| Masonry repointing | $600 – $2,000 |
Two things push price up in Everett more than anything else: how much water damage the masonry has taken on, and whether the flue needs a full reline versus a HeatShield repair. We give you a flat price per job before any work starts, and the written estimate is what you pay.
Neighborhoods We Serve in Everett
We work across Everett, from the historic north end and downtown down through the south and east side rambler neighborhoods. Because we’re dispatching crews throughout the metro, most Everett addresses are reachable quickly, and we’ll give you a realistic window when you book. Call (888) 545-1163. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
- Historic north end
- Downtown and the waterfront
- Silver Lake
- South Everett
- Riverside
Service Area – Cities Near Everett
Everett sits in the middle of the Snohomish County chimney market, and we work the surrounding towns as well. If you’re just outside the city line, we can still help: Bunk Foss, WA, Clearview, WA, Cathcart, WA, and Lochsloy, WA are all within our service area. The climate doesn’t change much across those miles, so the same damp-flue and water-intrusion problems apply.
Serving Everett, WA – Our Local Coverage Area
We serve Everett and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Everett
Most Everett jobs are booked within a few days, and we’ll give you a real window when you call rather than a vague promise. Call (888) 545-1163. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Some repairs, particularly structural masonry and relining, may require a permit through the city. We’ll tell you when one applies and what it involves before the work is scheduled. Call (888) 545-1163 for an exact quote; estimates are free.
We cover Everett and the surrounding Snohomish County communities, including Bunk Foss, Clearview, Cathcart, and Lochsloy. If you’re unsure whether your address falls inside the area, call and we’ll confirm.
Chimney work is a safety trade, and we treat it like one. If you’re in Everett and your chimney hasn’t been looked at this year, or you’ve had a chimney fire or a flag on an inspection report, call (888) 545-1163 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Nothing gets recommended without camera evidence you can see for yourself, and we’ll tell you plainly when work can safely wait.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Everett Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Brooke Padgett"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Wade Rhodes"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Heather Quinn