Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Sweep for Everett Homeowners
A wood-burning fireplace in Everett earns its keep from October through March, and that workload leaves creosote behind in ways homeowners can’t see from the hearth. A professional chimney sweep removes that buildup before it becomes the fuel a chimney fire needs, and it puts a camera on the flue so you know what condition your system is actually in. Our technicians have up to 15 years of experience and carry the tools to clean, inspect, and repair on the same visit rather than handing you off to another company. We work with professional-grade materials from DuraFlex, Olympia Chimney, and Copperfield because liner and cap quality decides how long a repair holds. Same-day chimney sweep appointments are available in Everett. Call (888) 545-1163 and we’ll book your sweep.

Chimney Sweep Services
Chimney Sweep Services cover the full scope of keeping a flue clear and safe to use: creosote removal, soot cleanup, a visual assessment of the firebox and damper, and a look at the cap and crown from the roof. You need them when the firebox smells smoky on damp days, when you’ve burned more than a cord of wood since the last cleaning, or when a home sale or insurance renewal has put an inspection flag on the property. Chimney Sweep Everett handles sweep work with drop cloths, a sealed vacuum, and brushes sized to your flue type, and we finish with a camera look at the liner so you see what we see. A typical sweep in Everett runs $150-$290 depending on flue condition and access, with the written estimate setting the final price.
What a Standard Sweep Covers
We brush the flue from the top down, run a HEPA vacuum the whole time to keep soot out of your living room, and clean the firebox floor and smoke shelf. The visit ends with photos of anything that concerns us, which you keep. Nothing is recommended that isn’t visible in those images.
Wood Stoves and Inserts
Inserts and freestanding stoves have their own flue paths and baffle layouts, and they need to be cleaned with the baffle and blanket accounted for rather than ignored. We remove those components, clean behind them, and set them back correctly. If the gasket or baffle is failing, you’ll see it in the report.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cleaning
Chimney Cleaning is the hands-on removal of creosote and soot from the flue, smoke chamber, and firebox, done with brushes matched to your liner material. It’s the service that matters most here because the wet Puget Sound winters push wood to burn cooler and smoke more, and cooler flue gases deposit glazed, tar-like creosote that a casual cleaning won’t touch. Chimney Cleaning on a firebox that hasn’t been opened in years usually turns up more than soot: rusted dampers, failing mortar joints, and cracked flue tiles. We schedule a chimney sweep for exactly this reason, and our cleaning pricing in Everett falls in the $150-$290 range, with heavier glazed buildup quoted higher after we see the flue. The written estimate always sets the price.
How We Handle Heavy Creosote
Stage two and stage three creosote won’t come off with a standard brush pass, and forcing it can damage tiles. We identify the stage first, then use the right tooling and chemistry for that level. If the liner itself is failing, that’s a repair conversation you’ll have with evidence in hand.
What Stays Out of Your House
Soot travels through a home on the soles of boots and in still air. We lay drop cloths from the door to the hearth, keep the vacuum running at the firebox throughout, and wipe down surfaces as we go. Cleaning a chimney shouldn’t create a second cleaning job.
Fireplace Cleaning
Fireplace Cleaning focuses on the firebox and hearth itself: ash removal, soot off the glass or screen, cleaning of the log grate and andirons, and wiping down brick or stone once the soot film is broken loose. We recommend it whenever a fireplace sits unused through the warm months and picks up a stale, smoky smell, or after a season of regular burning has left ash packed against the firebox walls. Chimney Sweep Everett treats fireplace cleaning as part of the sweep rather than a separate upsell, which is why we don’t charge a second visit fee when both are done together. Standard fireplace cleaning in Everett typically runs $120-$220 depending on the size of the firebox and the amount of ash. Your estimate confirms the number before we start.
Odor and Damp-Season Smell
A cold flue can push smoky air back into a room when the house is sealed up, and leftover ash makes that smell worse. Clearing the old ash and soot, then confirming the damper seats properly, resolves most of it. If the smell returns, the cause is usually draft or moisture, not cleanliness.
Brick and Mortar Surfaces
Brick holds soot in its pores, and scrubbing it dry just drives the stain deeper. We use the right cleaner for masonry and take care around the mortar joints, which are softer than the brick. Painted surrounds get a different approach entirely.
Chimney Services
Chimney Services means the work that goes beyond cleaning: relining, crown repair, cap replacement, flashing sealing at the roof line, and weatherproofing of exterior masonry. You need them when water is getting in, when a liner has cracked or deteriorated, or when an inspection has flagged a deficiency your insurer wants corrected. Chimney Sweep Everett handles all three tiers, sweep, inspection, and repair, with one team from diagnosis through completion, so there’s no gap where one contractor blames another. Repairs use DuraFlex liner systems, HeatShield resurfacing, and Famco and Gelco products, and pricing is set per job by the written estimate after we’ve seen the chimney. Call (888) 545-1163 to schedule.
Liner and Flue Restoration
HeatShield resurfacing rebuilds a deteriorating liner from the inside, and DuraFlex stainless systems replace one that’s past resurfacing. Choosing between them comes down to the condition the camera shows. Both are structural fixes, not cosmetic patches.
Caps, Crowns, and Water Intrusion
Most chimney damage in this climate starts at the top, where rain gets into a cracked crown or an open flue and freezes in the masonry. A properly fitted cap and a sealed crown stop that cycle. We photograph the crown before recommending anything.
Chimney Sweep Certified
Chimney Sweep Certified describes the level of training and method a sweep should bring to your flue, and it’s the standard to ask about before you let anyone on your roof. A certified sweep knows the difference between a sweep and an inspection, documents findings with photos, and won’t tell you a liner is failing without showing you why. Our technicians have up to 15 years of experience and work to that standard on every Everett job. When people search for a chimney sweep near Fobes Hill, this is the distinction that matters: not a generalist with a brush, but a specialist who understands liner systems. Certified-level sweep and inspection work in Everett typically runs $150-$290 for the cleaning, with inspection included or priced separately depending on depth.
Why Certification Matters for Insurance
Insurers increasingly ask for documentation of chimney condition, especially on older homes. A photographed report from a trained sweep carries weight a verbal “looks fine” doesn’t. Keep the report with your policy paperwork.
What a Real Inspection Includes
A proper look covers the firebox, damper, smoke chamber, flue, cap, crown, and the exterior where it meets the roof. Camera footage of the flue interior is the part that separates an inspection from a glance. You should see that footage yourself.
Gas Fireplace Cleaning
Gas Fireplace Cleaning is different work from wood: there’s no creosote, but there is soot on the logs and glass, dust in the burner ports, and a venting path that needs to stay clear. You need it when the flames have gone lazy or yellow, when the glass fogs and won’t wipe clean, or when the unit hasn’t been opened in several seasons. Chimney Sweep Everett cleans the burner assembly, logs, and glass, checks that the vent termination is unobstructed, and confirms the flue path is sound, which matters for carbon monoxide safety. Gas fireplace cleaning in Everett generally runs $130-$240 depending on the unit type and how much disassembly it needs. A written estimate settles the price before any work begins.
Burner Ports and Flame Quality
Dust and lint block burner ports and change the flame shape, which affects how completely the gas burns. Cleaning those ports restores a steady blue flame. A persistent yellow flame or soot deposit is a reason to stop using the unit and have it checked.

Glass, Logs, and Venting
Firebox glass clouds with mineral and soot film and needs a cleaner made for it, not household glass spray. We clean the logs without disturbing the ember bed layout, then check the vent cap outside. If anything about combustion looks off, we say so plainly.
Chimney Maintenance
Chimney Maintenance is the routine that keeps a flue safe between cleanings: annual sweeping, periodic camera inspection, cap and crown checks, and prompt attention to small masonry issues before they spread. The general rule most chimney professionals work from is one cleaning per cord of wood burned, and a yearly inspection even for gas appliances. In Everett, where a wet fall follows a dry summer, we see masonry damage accelerate when water sits in cracks through the freeze cycles, so fall is the practical time to catch it. Chimney Sweep Everett bundles maintenance work with the chimney sweep visit rather than charging separate trips. Maintenance-level service in Everett typically runs $150-$290 for the sweep, with any repairs quoted separately after inspection.
Best Time of Year to Book
Book before the burning season starts, not in the middle of it. A flue that’s clean and inspected in early fall means you’re not learning about a liner problem in January when you want the fireplace most. Scheduling ahead also gives repair work room to be done properly.
What to Watch Between Visits
Note any new smoke smell, draft changes, or water staining on the ceiling near the chimney. Loose cap hardware and crumbling crown edges are visible from the ground with binoculars. Catching those early keeps a small repair from becoming a liner job.
Brands We Service
We work with Olympia Chimney products regularly, and we know how their liners and venting components are built and where they tend to wear. That familiarity means a repair on Olympia equipment gets done with the right parts the first time rather than a workaround. We also install and service DuraFlex stainless liner systems, which is the brand we reach for when a flue needs full relining, and HeatShield when resurfacing is the better call.
Famco and Copperfield products come up often in cap and chase cover work, and we know how those materials hold up against a Puget Sound winter. Gelco coatings show up in our weatherproofing work on exterior masonry. Whether you have Olympia Chimney, Famco, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Smoke rolling back into the room. A fireplace that smokes when it used to draw well usually has a partial blockage or a draft problem. It’s a sign the flue needs looking at before the next fire.
- A strong, tar-like smell on warm days. That’s glazed creosote releasing vapor, and it’s the type that’s hardest to remove and most prone to igniting. It doesn’t clear on its own.
- Water stains near the chimney or on the damper. Moisture is getting past the crown, flashing, or cap. Water and masonry don’t coexist well through a Washington winter.
- Visible cracks in the firebox or flue tiles. Cracked masonry lets heat and gases reach framing that was never meant to see them. Stop burning until someone trained has looked at it.
- Birds, nests, or debris in the flue. An open or damaged cap invites nesting, and a blocked flue pushes carbon monoxide into the house instead of up and out. Get it cleared before you light anything.
Our Process, Step by Step
- 1
Phone consultation and booking. We ask about your appliance type, when it was last cleaned, and whether you’ve noticed smoke, smell, or water issues. That tells us what to bring and how much time to set aside. Call (888) 545-1163 to start.
- 2
Protect the space. Drop cloths go down from the entry to the hearth, and the vacuum runs from the moment we open the firebox. Keeping soot out of your home is part of the job, not an afterthought.
- 3
Clean the full flue path. We brush from the top down with the right tooling for your liner type, clear the smoke shelf and firebox, and handle the damper and cap as needed. Wood or gas, the method changes but the thoroughness doesn’t.
- 4
Run the camera and document. A video scan of the flue shows the liner’s actual condition, and we photograph the crown, cap, and firebox. You get those images, and any recommendation we make has to match what they show.
- 5
Walk you through the findings and quote any repair. We tell you what’s urgent, what can wait a season, and what it will cost in writing. Nothing is scheduled without your agreement, and the estimate is free.
How Much Does Chimney Sweep Cost in Everett?
A typical chimney sweep in Everett runs $150-$290, and that range holds for both wood and gas appliances depending on flue condition and access. A fireplace cleaning done alongside the sweep typically falls in the $120-$220 range. Gas fireplace cleaning generally runs $130-$240 depending on the unit and how much disassembly the burner and logs require. Where repairs come in, a relining or resurfacing job is quoted per chimney after a camera inspection, and the written estimate is what sets the final price. We don’t quote repairs over the phone sight unseen, because guessing at liner condition from a description does nobody any favors.
What pushes a sweep toward the top of the range: heavy glazed creosote that needs staged removal, a flue with offsets or a difficult roof pitch, an insert or stove that has to be disassembled, or a chimney that’s gone many seasons without service. What keeps it at the low end: a straightforward flue, easy roof access, and regular prior cleaning.
To avoid overpaying, ask for the written estimate before work starts and ask what’s included in the sweep price versus billed separately. We include a camera look and a photo report with the sweep, so you’re not paying extra to find out what’s wrong. If a company tells you the liner must be replaced, ask to see the footage. Repair work uses DuraFlex, HeatShield, and Copperfield materials, and you should know which one is going into your chimney and why. Estimates are free. Call (888) 545-1163 for yours.
Our Service Area Near Everett
We sweep chimneys across Everett and the surrounding communities, including Fobes Hill, Bunk Foss, Cathcart, Clearview, and Three Lakes to the north and east, plus Esperance, Meadowdale, and Meadowdale’s neighboring Sisco Heights and High Bridge areas. Lochsloy and Lake Cassidy are on our regular routes as well. Homes out toward Lake Cassidy and Sisco Heights tend to sit on larger wooded lots with taller flues and more debris from surrounding trees, which changes what we bring. If you’re searching for a Chimney Sweep Everett to handle a sweep before burning season, call us and we’ll confirm scheduling for your address.
Serving Everett, WA – Our Local Coverage Area
We serve Everett and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Sweep in Everett
A chimney sweep is a trained specialist who cleans creosote, soot, and debris from your flue, firebox, and smoke chamber, then checks the system’s condition. It’s a safety service, not housekeeping. A proper sweep also inspects the liner and venting so you know your chimney is sound before you burn. We do both on the same visit in Everett.
A standard sweep takes about 45 minutes to an hour and a half, depending on the flue and how much buildup there is. Add time for an insert, a stove, or heavy creosote. We give you a time estimate when you book so you can plan your day around it. Call (888) 545-1163 to schedule.
Most sweeps in Everett run $150-$290, with fireplace cleaning often $120-$220 and gas fireplace cleaning $130-$240 when done on their own. Condition and access drive the final number, and the written estimate sets it before work begins. Estimates are free. Call (888) 545-1163 for an exact quote.
Yes. We install and service DuraFlex liner systems and work with Olympia Chimney products regularly, and we handle HeatShield resurfacing, Famco, and Copperfield materials as well. Recognizing how a brand’s components are built matters when a repair has to fit correctly. Whether yours is Olympia Chimney or another make, we can help.
Same-day chimney sweep service is often available in Everett, and we book you into the earliest opening. We dispatch Sunday through Friday from 7am to 7pm and are closed Saturday. We answer 24/7, so a call outside dispatch hours is booked into the next opening.
We stand behind the work we do, and we document it with photos so you can see exactly what was done. We don’t publish guarantees we haven’t confirmed, so ask us to spell out what’s covered on your specific job. That conversation happens before the work begins, not after.
Clear the hearth and the floor in front of the fireplace, and move anything breakable off nearby surfaces. Skip a fire for at least 24 hours before we arrive so the firebox is cool. Secure pets in another room, and let us know where the roof access is if you know it.
Schedule Your Chimney Sweep Service in Everett Today
Book your sweep before burning season and you’ll know your flue is clear, your liner is sound, and your cap is doing its job. We’ll show you the camera footage, quote any repair in writing, and tell you plainly when work can safely wait. Estimates are free and there’s no obligation. Call (888) 545-1163. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Everett.