Chimney Repair in Everett, WA | Chimney Sweep Everett

Chimney Repair in Everett - You See the Footage Before You Get a Price

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Fast, Reliable Chimney Repair Across Everett

Everett chimneys take a beating that inland chimneys don’t. Between the salt air rolling off Puget Sound and better than 45 inches of rain a year, masonry here spends most of its life wet, and that shows up as cracked crowns, rusted caps, and brick faces peeling off above the roofline. If your chimney is shedding grit onto the roof or your flue has started to smell of damp soot, that’s usually the first sign water is winning. Call (888) 545-1163 and we’ll get a repair visit on the books for your Everett home, with a written estimate before any work starts.

Call (888) 545-1163

Why Everett Homeowners Call Chimney Sweep Everett for Chimney Repair

Everett is a marine town, and the chimney work here reflects it. We’re a dedicated chimney specialist, not a roofing or HVAC company that sweeps on the side, and we work exclusively with professional-grade brands like HeatShield, DuraFlex, Olympia Chimney, and Copperfield because the materials behind a repair matter as much as the labor. On the old brick chimneys around the historic north end and downtown, we routinely find glazed creosote and spalled brick that a generic handyman wouldn’t know how to treat. Our technicians have up to 15 years of experience, and they know the difference between a repair that holds through the wet season and one that fails by February.

We bring the same team to a sweep, an inspection, and a rebuild, so nothing gets handed off when the diagnosis changes mid-job. That matters in Everett, where a cap that looks fine from the ground often turns out to be rusted through from the inside. We name the brands we use because a stainless cap and a galvanised one are not the same repair, no matter what the bid sheet says.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

What Actually Fails First on an Everett Chimney

Everett’s location on the Snohomish River delta, where river moisture meets Puget Sound salt air, is the single biggest driver of chimney repair calls we get in this city. Most failures start at the top. A cracked, crumbling crown lets rain sit on the masonry through the long October-to-April wet season, and that trapped water works its way into the mortar joints and clay tile liners. Galvanised caps and flashing rust through quickly in the salt-laden marine air, so rain gets straight into the flue and speeds spalling of the brick below. On the 1890s-1920s mill-worker and craftsman homes near the waterfront and downtown, decades of wet-dry cycling show up as brick faces flaking off and mortar joints receding. On the 1950s-70s tract and rambler housing in south and east Everett, the same damp usually corrodes the prefab metal cap and warps the damper instead.

There’s a second problem unique to this climate. Creosote in a damp flue absorbs moisture and glazes over, so sweeps here find hard, shiny third-degree creosote in older north-end brick flues far more often than you’d see in dry Eastern Washington. That glaze hides cracked liners and smoke chambers until a proper inspection opens them up.

Chimney Repair Companies in Everett

Chimney Repair Companies working around Everett start with a Level 2 inspection, because you can’t price a repair you haven’t actually looked at. A qualified local pro typically rebuilds the crown, swaps the galvanised cap and flashing for stainless components, and repoints or replaces spalled brick – or drops a HeatShield or stainless DuraFlex liner if the clay tile is cracked. On the south and east side, home repairs usually mean component replacement and a resealed flashing collar. A typical crown rebuild or flashing job in Everett runs roughly $450 to $1,200, while a full reline falls in the $2,500 to $6,000 range depending on flue length and material.

Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (888) 545-1163

Crowns, Caps, and Flashing

These three pieces are the roof’s first line of defense against Everett rain, and they’re what fails first. We rebuild crowns with proper sloping and overhang, replace rusted caps with stainless models, and reseat flashing so water runs off instead of soaking in. It’s the least glamorous repair and the one that saves the most money long-term.

Component Upgrades on Prefab Systems

On 1950s-70s south and east Everett homes with prefab metal chimneys and wood stoves, the fix is usually component replacement rather than a full rebuild. We swap corroded caps and warped dampers and reseal the flashing collar. Sometimes the whole prefab chase needs replacement, and a Level 2 inspection tells you which.

Chimney Masonry Repair in Everett

Chimney Masonry Repair in Everett means dealing with brick and mortar that have spent decades cycling between soaked and dried-out. On the 1890s-1920s north-end chimneys, we tuckpoint receding mortar joints, replace spalled brick, and apply a breathable waterproofing that keeps water out without trapping moisture inside the masonry. HeatShield resurfacing handles cracked or deteriorated clay tile liners at a structural level. Rebuilding a chimney above the roofline in Everett typically runs $2,000 to $7,000, while spot tuckpointing and brick replacement cost far less, often in the $600 to $1,800 range. The written estimate sets the final price.

Repointing and Spalled Brick

Spalling happens when water gets behind the brick face and freezes or pushes outward over time. We cut out the failed brick, replace it with matching units, and repoint the mortar joints around it. Done right, the repair blends in and stops the peeling.

Waterproofing and Liner Restoration

Once the brick is sound, a breathable waterproofing coat keeps Everett’s marine damp from soaking back in. If the liner behind the brick is cracked, HeatShield resurfacing restores it without tearing out the whole chimney. Both extend the life of masonry that’s otherwise in good shape.

Trusted Brands We Service in Everett

We work exclusively with professional-grade brands that chimney specialists trust: HeatShield for structural liner resurfacing, DuraFlex for full stainless relining, Olympia Chimney and Copperfield for caps and components, Famco for weatherproofing and exterior protection. We don’t stock parts locally, but our repair work uses these names because a stainless cap and a galvanised one are not interchangeable in Everett’s salt air. We name the brands we use because we want you to be able to look them up. From creosote buildup to liner deterioration, we diagnose the full picture, not just what’s easy to see.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Want to talk it through?Free estimate, price agreed before work starts
Call (888) 545-1163

Common Chimney Repair Problems We See in Everett Homes

  • Rusted galvanised caps and flashing: Salt-laden marine air eats through galvanised steel quickly, letting rain into the flue and driving spalling of the brick below. Stainless is the right fix in Everett.
  • Cracked or crumbling chimney crowns: Common on 1890s-1920s north-end masonry chimneys, a failing crown lets water sit on the masonry through the long rainy season, worsening mortar joints and clay tile liners.
  • Glazed third-degree creosote: Damp flues let creosote absorb moisture and harden into a glaze a brush can’t touch. It also hides cracked liners and smoke chambers until a Level 2 inspection opens them up.
  • Spalled brick from wet-dry cycling: Decades of soak-then-freeze push the face off older brick, especially on chimneys near the waterfront and in the historic north end where the mill-town stock is densest.

Pricing for Chimney Repair in Everett, WA

Repair pricing in Everett starts with a Level 2 inspection, because the range below depends on what that inspection finds. Crown rebuilds typically run $450 to $1,200. Cap and flashing replacement runs about $300 to $800. Spot tuckpointing and brick replacement typically falls in the $600 to $1,800 range, while a full rebuild above the roofline can run $2,000 to $7,000. A HeatShield liner resurfacing usually lands around $1,800 to $3,500, and a full DuraFlex reline runs $2,500 to $6,000. We give a free written estimate, and that estimate sets the final price. Call (888) 545-1163 to schedule one for your Everett home.

We Also Serve Cities Near Everett

If you’re just outside the city, we also cover the surrounding communities of Bunk Foss, Clearview, Cathcart, and Lochsloy. The same marine weather and damp-flue problems travel inward, so the repair approach doesn’t change. Whether you’re calling from the historic north end or one of the nearby towns, we handle chimney repair the same way from diagnosis to written estimate. If you’re anywhere in or around Everett, reach out and we’ll get you booked.

Serving Everett, WA – Our Local Coverage Area

We serve Everett and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Chimney Repair in Everett

What Happens When You Call

Call (888) 545-1163. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday. A call outside dispatch hours is booked into the next opening. We’ll ask about your chimney and get a free written estimate scheduled for your Everett home. One team handles the sweep, the inspection, and the repair, so there’s no gap when the diagnosis changes. Chimney work is a safety trade, and we treat it like one.

Written by the team at Chimney Sweep Everett.

Why Everett Chooses Chimney Sweep Everett

We set the standard for chimney repair in Everett.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Everett

Getting your chimney repair project started is simple.

1

Call or Request a Free Estimate

Tell us about your chimney repair project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Everett Customers Say

Trusted by homeowners across Everett and surrounding areas.

★★★★★

"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."

Brooke Padgett
★★★★★

"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."

Wade Rhodes
★★★★★

"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."

Heather Quinn

Ready for Chimney Repair in Everett?

Call now for a free estimate, or request one below. Licensed, insured, and ready to schedule your free estimate in Everett.

(888) 545-1163

Request a Free Estimate in Everett

Tell us about your chimney repair needs. We'll get back to you to set up your free estimate.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Local Service Coverage
Call Now - We Answer 24/7