Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Clearview
Chimney sweeping in Clearview isn’t the same job it is in a dense city. Here the woods do most of the damage. Fir needles and moss push into caps and screens through the wet months, so by the time winter storms knock the power out and your stove finally gets lit, the flue is blocked and last season’s creosote has glazed hard. We serve Clearview with a full-service chimney specialist’s approach: sweep, inspection, and repair from one team, no hand-offs. Our technicians have up to 15 years of experience. Call (888) 545-1163. We answer 24/7, with fast dispatch from 7am to 7pm.
Why Clearview Homeowners Call Chimney Sweep Everett for Chimney Sweep
We’re a dedicated chimney specialist, not a roofing or HVAC outfit that sweeps on the side, and that focus shows in the questions we ask Clearview homeowners before we ever touch a brush. Homes ringing the rural-residential edges of Clearview tend to have older factory chimneys, clay-tile flues, and the occasional freestanding stove or pellet stove added later, so we plan for those systems rather than assume a standard fireplace. Our chimney sweep team treats safety as the whole point of the trade, which means we diagnose the full picture, not just what’s easy to see.
Clearview customers get quoted per job by a written estimate, and the estimate is free. When we recommend a repair, you see the camera footage first, so you’re never asked to take our word for a liner you can’t verify. That’s the whole reason people in Clearview call us. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday. Our technicians bring up to 15 years of experience to every stack they open.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Maintenance in Clearview
Chimney Maintenance in Clearview starts with recognizing that the dominant problem here isn’t firebox soot. It’s the Pacific Northwest fir canopy and near-constant winter damp driving moss, needles, and wet creosote down from the cap into the flue. A typical maintenance visit runs $180 – $340 and includes pulling the cap and screen, clearing the needles, brushing the flue, and a camera look at the clay tile. If the stove only runs during outage weeks, this is the check that catches a blocked cap before it smokes back into the room. The written estimate sets the final price.
Clearing caps and screens
A cap packed with Douglas fir needles and moss cuts the draft off at the top, and that’s what most of these visits are really about. We clear the screen so the flue can breathe again. If the cap itself is failing, we’ll say so plainly rather than patch it.
Checking crowns and mortar joints
Wet marine winters drive spalling and hairline cracks into masonry that’s seen 1970s-2000s weather, and a cracked crown lets water straight into the stack. We inspect the crown and mortar joints during every sweep. Where it needs sealing, we use Gelco and Famco products so the repair addresses what the weather will eventually expose.
Chimney Sweep Services in Clearview
Chimney Sweep Services in Clearview cover the sweep itself, a Level 1 inspection alongside it, and a Level 2 inspection when a sale, a flue change, or a suspected fault calls for camera work. A standard annual sweep runs $180 – $340; a Level 2 with camera footage typically runs $300 – $550. If you’ve just bought a Clearview home and can’t tell when the stack was last opened, book the Level 2 and watch the screen with us. Estimates are free and flat, agreed before we start.
Sweeping stoves that only run in outages
Treating an outage-week stove like a heavily used wood burner is a common mistake, and it skips the cap clearing that actually restores the draft. We sweep for damp, glazed creosote rather than assuming a light load of soot. That distinction changes what the brush and the camera find.

What the camera shows you
Every recommendation we make in Clearview comes with footage you can see for yourself. If the flue is sound and the creosote is light, we say so and the work can safely wait. Nothing gets upsold on a guess.

Trusted Brands We Service in Clearview
We name the brands we use because the materials behind a repair matter as much as the labor. For relining, we work with DuraFlex liner systems and Olympia Chimney; for structural restoration of a damaged flue, HeatShield; and for weatherproofing and exterior protection, Gelco and Famco. Copperfield covers the accessories that finish a job properly. We hold no parts on hand and carry no stock, so turnaround depends on sourcing, but we set that expectation in the written estimate. For a Clearview homeowner, the point of naming these brands is simple: the flue you end up with is built to professional standards, not whatever was cheapest that week.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Clearview Homes
- Needle-packed caps and screens. Our heavy fir cover sheds needles straight onto caps through the wet months, so a stove that hasn’t been lit since the last outage finds its draft cut off at the top. Clearing the screen often restores more than brushing does.
- Glazed, not powdery, creosote. Intermittent burning in a damp flue lets creosote bake on rather than powder off, and that changes how the sweep has to proceed. Third-degree creosote needs to be flagged, not brushed past.
- Older factory chimneys and clay-tile flues. Clearview’s split-levels and ramblers often carry factory-chimney fireplace assemblies with clay tile that has seen decades of wet winters. Spalling crowns and cracked mortar joints let water in and are worth catching early.
- DIY stove installs to verify. Freestanding wood and pellet stoves added by a previous owner sometimes vent into a stack never designed for them. We check the install against code and show you what needs attention.
Pricing for Chimney Sweep in Clearview, WA
A typical chimney sweep in Clearview runs $180 – $340, and a Level 2 inspection with camera footage runs $300 – $550. Creosote removal on a glazed flue, or work that includes pulling and resetting a packed cap and screen, can push toward the upper end of those ranges. What moves the price is the system, not the address: an older clay-tile stack with a damaged crown takes more time than a factory chimney with a clean cap. You’ll get a flat price agreed before we book, and the written estimate sets the final price. Estimates are free.
We Also Serve Cities Near Clearview
Clearview is one of the communities we cover across this part of Snohomish County, and we extend the same sweep, inspection, and repair work to nearby homeowners in Cathcart, Meadowdale, Esperance, and Everett. If you’re just outside Clearview, the drive is short and the standards are the same: camera evidence before any recommendation. Call (888) 545-1163 for a free estimate.
Serving Clearview, WA – Our Local Coverage Area
We serve Clearview and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Clearview
Because the cap and screen are packed with fir needles and moss that built up through the wet months, cutting off the draft at the top. When the stove finally gets lit during an outage, the smoke has nowhere to go but back inside. Pulling and clearing the cap restores the draft, and the brush and camera confirm whether the flue is compromised too. Call (888) 545-1163 for an exact quote – estimates are free.
No. A clay-tile stack without a liner is common in Clearview’s 1970s-2000s builds, and plenty of them are sound. Relining is a real option when the camera shows spalling, cracks, or an appliance venting into a stack it wasn’t designed for, and that’s when we bring DuraFlex or HeatShield into the conversation. You see the footage and decide. Nothing gets recommended on a guess.
It looks like a hard, shiny glaze on the flue wall, and brushing alone won’t shift it because it’s baked on. In Clearview’s damp climate, creosote from intermittent burning glazes rather than powders, so it builds up hard. Getting it off takes chemical treatment or mechanical action we can show you before we start. Call (888) 545-1163 for an exact quote – estimates are free.
Once a year, even if the firebox sees little use. Clearview’s needles and moss clog caps regardless of how much wood you burn, and damp, glazed creosote can form between intermittent burns. An annual sweep and Level 1 inspection catch a blocked cap before it becomes a smoky outage night. Call (888) 545-1163 for an exact quote – estimates are free.
We check the whole vent system against code: whether the flue is the right size and material for that stove, clearances, the chimney cap, and whether the stack was designed for it at all. Older Clearview homes often carry these added stoves. A Level 2 camera inspection shows you exactly what’s sound and what needs correction. Call (888) 545-1163 for an exact quote – estimates are free.
Ready to breathe easier about your chimney? Call Chimney Sweep Everett at (888) 545-1163. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and nothing gets recommended in Clearview without camera footage you can see for yourself.
Written by the team at Chimney Sweep Everett.