Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in Hansville, WA
We provide independent DuraFlex service across Hansville, and the one thing that makes our work here different is where we start: at the top. A DuraFlex liner is a flexible stainless steel flue, and on Hansville’s wind-and-salt coast the cap, top plate and crown above it weather harder than the liner inside it. That’s why an assessment here checks the top termination and crown before recommending anything. Call (888) 545-1163 for a free estimate.
Chimney Sweep Everett is an independent DuraFlex service provider. We’re not affiliated with the manufacturer and not an authorized dealer. We’re a full-service chimney specialist, not a side service of a roofing or HVAC company, and one team handles your sweep, inspection and repair from start to finish.
Why Hansville Residents Choose Us for DuraFlex Service
Because we know this liner system, and we know this coastline. We work on the full line of DuraFlex stainless chimney liners and components, and we’ve learned how the joints, insulation and cap designs behave under the driven rain and salt air that come off Puget Sound and Admiralty Inlet. That’s a different skill from sweeping a flue.
We use quality parts that fit the liner being retained. Generic caps and adapters fit poorly and leak at the coastal exposure here, so on any job where the existing DuraFlex liner stays in place, OEM components go back on it. When a liner is pitted or seam-failed, we say so and explain why rather than sell a patch.
Scheduling is straightforward. Tell us what the chimney is doing, we’ll book the sweep or inspection, and you’ll know what we found before any decision is made. We work throughout Hansville, from the exposed north end to Hood Canal-facing properties and the rural loop roads between them.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common DuraFlex Chimney Cleaning Problems We Solve in Hansville
- Salt-accelerated corrosion at seams, caps and top plates. Marine air works the stainless seams and the cap assembly harder than inland conditions do. In Hansville that shows up as rust staining and pitted metal sooner, and it’s the first thing we look at on any DuraFlex chimney.
- Wind-driven rain through failed or missing rain caps. Rain off Admiralty Inlet enters at the top, wets the liner and mixes with creosote to form a corrosive, glazed crust. That crust is harder to sweep than dry soot and does more damage the longer it sits.
- Glazed creosote from part-time, cool fires. Cabins and second homes that burn intermittently run cool, and cool fires glaze creosote on DuraFlex liner walls. Beach-salvaged and driftwood fuel adds salt to that glaze and makes it worse.
- Wind-scoured crowns and loose flashing. Mortar crowns and the flashing around the liner’s top termination loosen under persistent wind, opening gaps that let water track down the outside of the liner. That rusts the top plate and the clamp.
- Liner-wall creosote hiding real condition. Heavy glaze can mask pitting and seam wear until it’s cleaned. We remove the creosote first, then assess the liner itself with camera evidence you can see for yourself.
DuraFlex Service in Hansville: What Local Conditions Mean for Your Equipment
Hansville’s north-end and Hood Canal-facing homes sit in the strongest wind and salt exposure on the Kitsap Peninsula. On those properties, along Hood Canal Drive and the exposed lots along the north tip, it’s routine to find a rain-soaked, rusted cap and a wind-scoured mortar crown on the same chimney. So a DuraFlex liner assessment here can’t stop at the flue interior. It has to check the top termination and the crown above it, because that’s where the weather comes in.
In the exposed north-end and shoreline homes we see the same pattern described above: a DuraFlex liner serving a wood stove or insert shows rust staining at the top plate, and the rain cap has corroded or blown loose, letting wind-driven rain down onto a creosote-glazed liner. The usual cause is years of salt air and northerly wind working the cap, crown and flashing, helped along by part-time cool fires and occasional beach-salvaged wood. The fix that holds is a sweep, a check of the liner’s seams, new cap and top plate in proper DuraFlex components, resealed crown and flashing, and waterproofing on the masonry before anyone decides whether the liner can stay.
DuraFlex Models & Products We Service in Hansville
We service the kinds of DuraFlex products that go into residential chimney systems here: the round, single-wall stainless steel chimney liner; the insulated flexible liner kit used where a flue needs thermal protection; the Pro Top Plate and Deluxe Rain Cap assemblies that close off the top of the chimney; and the rigid-and-flexible liner sections used with wood stoves and inserts.
Choosing quality parts that fit comes down to matching what’s already there. A replacement cap has to seat properly on the existing top plate, and a top plate has to fit the flue opening it covers. When a part doesn’t fit, it leaks, and on this coast a leak is not a small annoyance. We’re an independent shop, so we’re honest about which parts a liner actually needs and which it doesn’t.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in Hansville
Every job is priced per job by a written estimate, and the estimate is free. Chimney sweeps, inspections and repairs are quoted separately because they’re different tasks. A Level 2 inspection with camera work and a photo report costs more than a standard sweep, and replacement of a cap or top plate, crown repair and waterproofing are priced on their own once we know the condition of the chimney.
- Sweep and creosote removal – quoted per job by written estimate
- Level 2 inspection with camera and photo report – quoted per job by written estimate
- Cap and top plate replacement with DuraFlex components – quoted per job by written estimate
- Crown, flashing and waterproofing work – quoted per job by written estimate
What drives the total is access, the condition of the crown and flashing, the amount of glazed creosote, and whether the liner can be retained or needs replacement. The written estimate sets the final price. Call (888) 545-1163 for an exact quote – estimates are free.
Serving Hansville, WA – Our Local Coverage Area
We serve Hansville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in Hansville
Because of salt air and constant wind. Hansville’s north-end exposure to Admiralty Inlet pushes marine air and driven rain against caps, top plates and liner seams harder than inland Kitsap sees, so corrosion starts sooner and shows as staining and pitting. That’s why we inspect the top termination on every visit. Call (888) 545-1163 to book an inspection.
Yes. Salt-soaked wood adds salt to the creosote, and combined with the cool, part-time fires typical of cabins it produces a harder, more corrosive glaze on the liner walls. That glaze is harder to sweep and does more damage if left. A proper sweep and assessment removes it and tells you what’s underneath.
If the metal is only surface-stained, paint can slow it down, but once the cap is pitted or the seams have opened, repainting hides the problem and rain still gets in. On coastal Hansville chimneys a corroded cap usually needs replacing with a proper DuraFlex component. We’ll show you what we find. Call (888) 545-1163 for an estimate.
It looks past what a sweep can see. A Level 2 inspection includes camera work inside the flue and a photo report, so we can assess the liner’s seams, joints and insulation, plus the cap, top plate, crown and flashing, and hand you the evidence. It takes longer than a standard sweep and is priced separately by written estimate.
Often yes. A scoured crown can usually be resealed and the flashing reset, then the masonry waterproofed, without rebuilding the chimney. Whether it’s enough depends on how far the water has tracked. We don’t recommend crown or masonry work without camera evidence you can see. Call (888) 545-1163 for a free estimate.
Service Areas Near Hansville
We serve Hansville homeowners and the surrounding communities, including Hansville itself and the rural roads between. We also work in Port Ludlow across the water and Indianola to the south, along with nearby Everett, Fobes Hill and Cathcart. If you’re not sure whether your address is covered, give us a call and we’ll tell you.
Book Your DuraFlex Service in Hansville Today
Call (888) 545-1163 for a free estimate on DuraFlex chimney cleaning, inspection or repair in Hansville. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday; we’re closed Saturday. One team handles your sweep, inspection and repair, and nothing is recommended without evidence you can see.
Written by the team at Chimney Sweep Everett.