Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Hansville, WA
Chimney inspection in Hansville is not the same job it is in dense suburbia. Homes here sit on large rural and semi-waterfront lots on the windswept north tip of the Kitsap Peninsula, where marine winds off Puget Sound and Admiralty Inlet push rain and salt air straight into caps, crowns and flues. Add a housing stock of older cottages and 1970s-90s cabin-style homes that have burned wood for decades, and an inspection becomes the most useful thing you can book before heating season. Call (888) 545-1163 to set one up.
Why Hansville Homes Are Different
Exposure drives almost everything we find in Hansville. Chimneys on the north end catch wind-driven rain and salt-laden air that inland Kitsap never sees, and the cool, wet maritime climate keeps wood fires burning slow and cool, which glazes creosote instead of drying it out. Metal flues rust faster here. Mortar crowns get scoured by wind and then soaked. Caps that were fine inland ten years ago are bent or rain-soaked on properties facing Hood Canal and Admiralty Inlet.
The housing stock compounds it. Hansville is a spread-out community of older shoreline cottages, custom and cabin-style homes from the 1970s through the 1990s, and a scatter of newer builds on big lots. Many run wood stoves or inserts, some run masonry fireplaces, and plenty of them have flues that have weathered decades of coastal damp with little more than a sweep now and then. Because lots are large and roads are rural, a technician’s day here is a few houses, not thirty. That shapes how we schedule inspections in the 98340 area, and it’s why we ask for the full story on the phone: what you burn, how often, and what the chimney looks like from the ground.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Hansville Services
Hansville homeowners call us about two things more than anything else: a sweep before the burning season starts, and a repair when the wind and salt have finally gotten to a cap, crown or flue.
Chimney Sweep in Hansville
Sweeping a Hansville chimney means dealing with more than soot. The salt air off Puget Sound reacts with creosote to leave a corrosive crust on flue walls, and cool-burning fires leave that crust glazed and hard. We brush and vacuum the flue, remove the creosote load, and check the cap and flashing while we’re up there, because that’s where coastal weather does its first damage. If you burn driftwood or beach-salvaged wood, tell us – the added salt changes what we find and how we clean it. To book a chimney sweep in Hansville, give us a call and we’ll set a day that fits before the season turns.

Chimney Repair in Hansville
Wind and salt make repair work here a regular need rather than an occasional one. Battered caps, cracked crowns, rusted metal flue sections and mortar joints that have taken decades of driven rain all show up on Hansville properties, and each one lets more water in until it’s addressed. We handle structural repair with professional-grade materials – HeatShield for liner restoration, DuraFlex for relining, Famco and Copperfield for caps and components – so the fix addresses the cause instead of covering it. You can arrange chimney repair by calling, and we’ll give you a written estimate before anything starts.

Chimney Inspection in Hansville

Chimney inspection in Hansville is where the wind and the wood meet. Homes from the 1970s through the 1990s, and older shoreline cottages, have usually seen decades of part-time burning in a cool, damp climate, which leaves glazed creosote and slow rust on metal flues. Add salt air and driven rain off Admiralty Inlet and you get caps that fail early and crowns that crumble. A proper Chimney Inspection tells you which of those you actually have, and which can safely wait.
Fireplace Inspection
Signs you need it
You need a fireplace inspection if smoke rolls back into the room, the fire draws poorly on windy days, or you’ve noticed dampness or staining around the firebox after a storm.
What it costs in Hansville
A fireplace inspection in Hansville typically runs $99 to $250, depending on whether it’s a straightforward visual check or a full Level 2 assessment.
How we do it
We examine the firebox, damper, smoke chamber and flue from both ends, run a camera where the flue allows, and photograph anything we flag so you’re looking at the same evidence we are.
Level 2 Chimney Inspection
Signs you need it
A Level 2 inspection is what you want after a chimney fire, a change of appliance, a property purchase, or any sign of water intrusion in the chimney structure.
What it costs in Hansville
Expect roughly $150 to $450 for a Level 2 inspection here, with the upper end covering camera work through the full flue run.
How we do it
We inspect every accessible part of the system – flue interior by camera, crown, cap, flashing, and the joints between – then hand you a photo report with what’s urgent, what’s routine, and what’s fine.
What Chimney Inspection Costs in Hansville
Inspection pricing depends on the level of assessment and how much camera work the flue needs. These are typical estimated ranges; the written estimate sets the final price.
| Item | Typical range in Hansville |
|---|---|
| Basic chimney inspection (Level 1) | $99 – $250 |
| Level 2 inspection with camera | $150 – $450 |
| Inspection plus sweep | $180 – $400 |
How often should a Hansville chimney be inspected?
Once a year, and always before you start burning for the season. Coastal damp and cool-burning wood here glaze creosote faster than inland climates, so annual checks catch problems early.
Will an inspection tell me if I need a new liner?
Yes, and we show you why. If the camera shows cracked or deteriorated liner walls, you’ll see the footage and the photo report before we recommend anything. Call (888) 545-1163 for an exact quote.
Brands We Service in Hansville
Our repair work uses professional-grade materials from brands chimney specialists trust: HeatShield for liner restoration, DuraFlex for relining, and Olympia Chimney, Famco and Copperfield for caps and components. We don’t stock parts on shelves – we specify what the job needs and order it. Take a look at our brands to see the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Hansville, WA
These are typical estimated ranges for Hansville work. The written estimate is what sets your final price.
| Service | Typical range in Hansville |
|---|---|
| Chimney sweep | $150 – $350 |
| Basic chimney inspection (Level 1) | $99 – $250 |
| Level 2 inspection with camera | $150 – $450 |
| Inspection plus sweep | $180 – $400 |
| Chimney cap replacement | $150 – $400 |
| Crown repair | $250 – $700 |
| Flue relining (DuraFlex) | $1,800 – $4,500 |
| Liner restoration (HeatShield) | $1,200 – $3,000 |
| Masonry and mortar repair | $300 – $1,500 |
| Flashing repair | $200 – $600 |
In Hansville, price climbs with exposure and access: a tall flue on a wind-battered north-end property may need staging or extra camera work, and salt-damaged metal flues often need more than a patch. We agree the flat price before we book, and nothing starts without your written estimate.
Neighborhoods We Serve in Hansville
Hansville is a set of small communities spread along the north end of the Kitsap Peninsula, and we work across all of them. Because the roads are rural and the lots are large, we route inspection days carefully, so booking ahead is worth it once the burning season gets close. One scheduling note covers the whole area: tell us what road you’re on and we’ll fit you into the nearest run.
- Hansville proper and the 98340 core
- Hood Canal-facing shoreline properties
- Admiralty Inlet and north-end lots
- Rural properties off the Hansville loop roads
- Cabin and cottage properties on large lots
Service Area – Cities Near Hansville
We work chimney inspections and repairs across the north Kitsap Peninsula and over toward the canal. If you’re just outside Hansville, we also cover Port Ludlow, WA across the water, Indianola, WA to the southeast, Esperance, WA further down the peninsula, and Suquamish, WA on the way toward the bridge. Give us your address and we’ll confirm coverage before we book.
Serving Hansville, WA – Our Local Coverage Area
We serve Hansville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Hansville
Yes. Hansville is one of the more remote parts of our service area, so we schedule it in routed days rather than promising a quick drop-in. Tell us your road and we’ll book you into the next run.
Most chimney repairs don’t need a permit, but structural or flue changes sometimes do, and shoreline properties can carry extra rules. Ask Kitsap County’s building department before work starts, and check any HOA covenants on your property.
A few weeks, at least. Hansville has a small, spread-out customer base and cooler weather drives everyone to book at once. Call (888) 545-1163 – we answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
If you’re ready to know what’s actually going on inside your chimney, call (888) 545-1163 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm. Our technicians have up to 15 years of experience, and one team handles your sweep, inspection and repair from start to finish.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Hansville Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Brooke Padgett"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Wade Rhodes"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Heather Quinn