Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Everett, WA
We provide independent Gelco service across Everett, and the one thing that shapes our Gelco work here is water: this is a marine climate where caps, liners and dampers sit damp for months at a stretch. Gelco is a chimney cap, and it’s a cap we know well enough to tell you when it needs resealing and when it needs replacing. We’re an independent service provider, not affiliated with or authorized by Gelco, and we say that up front because you deserve to know exactly who’s doing the work on your chimney. Our technicians have up to 15 years of experience with caps, liners and dampers. Call (888) 545-1163 to book a sweep in Everett.
Why Everett Residents Choose Us for Gelco Service
Gelco equipment shows up in a lot of the older homes around Everett, and working on the same hardware again and again teaches you its habits. We don’t need a factory badge to know where a top-mount cap tends to loosen after a few winters or why an uninsulated liner sweats in a cold masonry chase. That knowledge comes from hands-on work, not a dealer agreement.
We work exclusively with professional-grade brands: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco and Copperfield. When a Gelco part is still available we use it; when it isn’t, we reach for a quality aftermarket stainless equivalent rather than whatever’s cheapest. We name the brands we use because the materials behind a repair matter as much as the labor.
Scheduling is straightforward. We answer 24/7, and fast dispatch runs 7am-7pm Sunday through Friday. One team handles your sweep, inspection and repair, so there’s no hand-off gap between a diagnosis and the fix.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Everett
- Uninsulated Gelco liners condensing in cold masonry. In older Everett flues, a Gelco stainless liner installed without insulation stays cold, so moisture condenses on it through the wet season and acidic damp sits against the joints and seams. That’s slow corrosion, and it’s easy to miss until a joint fails.
- Gelco top-mount caps with rusted screens and loose housings. Seasons of wind-driven Puget Sound rain take a toll on cap screens and their housings. Once they rust or work loose, water and birds find their way into the flue, and the chimney gets wetter still.
- Seized Gelco damper assemblies. Soot and damp creosote build up when a stove sits idle through long wet stretches, and damper assemblies stick or seize as a result. We free them when they can be freed and replace them when they can’t.
- Liner-to-appliance connections and cap seals that loosen. These are the quiet failure points on Gelco kits. A loosened connection means draft loss; a degraded cap seal means water intrusion. Both get worse with every wet season in Everett.
- Glazed creosote that absorbed moisture and set hard. The glaze that forms after a spring chimney fire in a damp flue doesn’t flake off like dry soot. It bonds to the liner wall and takes real mechanical work to remove.
Gelco Service in Everett: What Local Conditions Mean for Your Equipment
Everett gets roughly 45-plus inches of rain a year, most of it falling between October and April, and the air stays cool and humid the rest of the time. That’s the whole story for Gelco equipment here. Caps and liners sit wet for months. Creosote absorbs that moisture and sets into a hard glaze instead of the dry, flaky soot a sweep sees east of the Cascades. In the older mill-town and craftsman houses around the historic north end and downtown, where original brick chimneys and clay tile liners are still in place, that damp does double damage: it corrodes liner seams while wet-dry cycling cracks mortar and spalls brick on the chimney exterior. A Gelco top-mount cap that’s doing its job keeps most of that rain out. One that’s rusted, loose or missing its screen lets it in. That’s why we look at the cap and the masonry as closely as the flue itself when we’re working in Everett.
Gelco Models & Products We Service in Everett
We service the full range of Gelco products installed in Everett homes: stainless flexible liner kits, both insulated and uninsulated; top-mount caps and multi-flue caps; fireplace dampers and damper assemblies; and fireplace inserts along with their components. When a repair calls for a part, we look for genuine Gelco components while they’re still available and turn to quality aftermarket stainless liner, cap and damper parts only where the OEM part is discontinued or clearly inferior. Repair is usually the right call when the liner and cap are sound. Replacement makes sense when a liner has corroded through or a cap is failing structurally. Either way, we’ll show you the evidence before you decide.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Everett
A chimney sweep in Everett typically runs $150 to $290 depending on the flue and how much glazed creosote has built up. Cap replacement generally falls between $150 and $400, and liner repair or relining runs higher because the materials and labor are more involved. The written estimate sets the final price, and there’s no service-call or diagnostic fee to get one.
What drives cost in Everett specifically: the condition of the cap and its seal, whether the liner needs a section repaired or a full replacement, the amount of damp-glazed creosote that has to come out, and whether the masonry needs waterproofing afterward. Your free estimate includes a look at the cap, the flue and the connections, plus a clear explanation of what can safely wait and what shouldn’t.
Call (888) 545-1163 for a free estimate. We answer 24/7.
Serving Everett, WA – Our Local Coverage Area
We serve Everett and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Everett
Not always. A rusted screen or a slightly loose housing can usually be cleaned, resealed or repaired. Replacement is the right call when the cap has failed structurally or its seal can’t be restored. Call (888) 545-1163 for an assessment.
Because damp creosote sets differently than dry soot. Everett’s wet season keeps the flue humid, so creosote absorbs moisture and glazes onto the liner wall after a chimney fire. It has to be removed mechanically, and that takes time. Call (888) 545-1163 to schedule a sweep.
It can be, as long as it’s properly insulated. An uninsulated liner in a cold Everett masonry chase condenses heavily and corrodes at the seams. Wrapping or relining with insulation solves the root cause. Call (888) 545-1163 to talk through your flue.
Once a year is the standard, and the wet climate makes the timing matter. A sweep at the end of the burn season catches glazed creosote and cap damage before the next rainy stretch sets in. Call (888) 545-1163 to book yours.
Usually, yes. A damper that’s sticking because of soot and damp creosote can often be cleaned and freed. One that’s seized at the hinge or damaged at the assembly needs replacement. We’ll tell you which after we look. Call (888) 545-1163.
Service Areas Near Everett
We also serve homeowners in Fobes Hill, Bunk Foss, Cathcart, Meadowdale and Clearview, and we cover the rest of the Everett area with the same approach to Gelco equipment and wet-climate chimney care.
Book Your Gelco Service in Everett Today
Whether your Gelco cap needs resealing or your liner is due for a look, we’ll give you a free estimate and a straight answer about what can wait. Call (888) 545-1163. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Everett.