Chimney Inspection in Everett, WA | Chimney Sweep Everett

Chimney Inspection in Everett - One Flat Price, You See What We See

A flat-price sweep with a camera inspection and photo report included. If we find something that needs attention, you see the picture before you hear a price - and we will tell you when it can wait.

Flat price quoted before we book

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Trusted Chimney Inspection for Everett Homeowners

An inspection is the part of chimney care that tells you what you actually own: how much creosote has built up, whether the liner is still sound, and whether the masonry and cap will hold up through another wet Everett winter. It’s the service homeowners call for when an insurer asks for documentation, when a flue starts smoking oddly, or when it’s simply been a few seasons and no one has looked. Our technicians have up to 15 years of experience, and we handle sweeps, inspections, and repairs as a full-service chimney specialist rather than a side job for a generalist contractor. Every inspection includes a camera look and a photo report you keep. We answer 24/7 at (888) 545-1163, with fast dispatch from 7am to 7pm, Sunday through Friday, and same-day visits are often possible in Everett.

professional chimney inspection service in Everett, WA

Call (888) 545-1163

Key Takeaways

  • Inspections come in levels; which one you need depends on why you’re booking.
  • You get camera evidence and photos, not just a verbal “your chimney is fine.”
  • Nothing is recommended without documentation you can see for yourself.
  • Cost depends on level and condition, and the written estimate sets the final price.

Fireplace Inspection

A fireplace inspection is a focused look at the firebox, damper, smoke chamber, and the first stretch of flue above the fire, and it’s the right call when your fireplace is the appliance you actually burn. You need one after a long stretch of use, before the first burn of the season, after any smoke spillage into the room, or when an insurer or a home sale asks for documentation. We check for cracked firebrick, a damper that no longer seals, gaps in the smoke shelf that push smoke back into the living room, and creosote glazed onto the firebox walls. We use professional-grade materials from names like HeatShield when a firebox or smoke chamber needs restoration, so the diagnosis and the fix come from one team. A fireplace inspection in Everett typically runs $150-$350 depending on what’s found and whether the flue is pulled in for a camera look. The written estimate sets the final price.

Firebox and Damper Checks

Firebrick cracks that look cosmetic can let heat reach the masonry behind them, and a damper that won’t close lets warm house air escape up the flue all summer. We check both as part of the fireplace look and tell you plainly whether each can wait or needs attention before the next fire.

Smoke Chamber Condition

The smoke chamber is the sloped space above the damper, and rough or deteriorated surfaces there collect creosote and catch sparks. We surface the chamber when it needs it using HeatShield, which smooths the transition so smoke moves up instead of curling into the room.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Inspection Services

Chimney inspection services cover the whole system, from the cap and crown down to the firebox, and they’re the reason to book a specialist instead of a generalist. You need them when you’ve just bought a home, when your flue has never been examined, when a wood stove or gas appliance was added, or when an insurance company wants proof the chimney is in serviceable condition. We work the levels properly: a basic annual look, a camera-level inspection when a change has happened or property changes hands, and a documented report you can hand to anyone asking. Because we also sweep and repair, the person who inspects your chimney is the person who can fix what they find, using brands like DuraFlex and Copperfield for liners and components. Chimney inspection services in Everett typically run $150-$500 depending on level, access, and roof conditions. The written estimate sets the final price.

Whole-System Walkthrough

We look at the exterior masonry, the crown, the cap and spark screen, the flashing where the chimney meets the roof, the liner, and the appliance connection as one system. Problems at the top often explain symptoms at the bottom, and vice versa.

Written Report With Photos

You get a written summary with photos of what we found and what it means, so you’re not relying on a verbal walkthrough you’ll forget by dinner. That report is what insurers and buyers usually want to see.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (888) 545-1163

Chimney Flue Inspection

A chimney flue inspection is a close look at the inside surface of the flue itself, and it’s the part of an inspection that catches the problems you can’t see from the hearth. You need one when the flue hasn’t been examined in a while, when you’re switching fuels or appliances, after a chimney fire, or whenever draft problems or smoke smells show up in the house. We check for cracked or spalled clay tile, gaps at the joints, missing mortar, and whether the flue is sized correctly for the appliance venting into it. If the tile liner is failing, DuraFlex stainless liner systems let us address the cause rather than sweeping around it. A flue inspection in Everett typically runs $175-$400 depending on access and whether camera work is needed. The written estimate sets the final price.

Tile and Joint Integrity

Clay tile liners crack with heat cycling, and gaps at the joints let combustion gases reach the surrounding masonry. We map what we find so you know which sections are sound and which aren’t.

Flue Sizing and Draft

An oversized flue runs cold and smokes; an undersized one chokes the appliance. We check sizing against what’s venting into the flue and note whether draft problems trace back to the flue itself.

Chimney Fire

A chimney fire is a fire burning inside the flue, fed by creosote that has built up on the liner walls, and even a small one can crack tile or warp a liner without the homeowner noticing. You need an inspection after any suspected chimney fire, and sooner rather than later: heat damage to the liner is often invisible from below. We look for the signatures a fire leaves behind, including cracked tiles, warped or discolored metal, puffy creosote, and heat damage at the top of the flue. If the liner is compromised, we reline with DuraFlex systems so the flue is safe to use again. Post-fire inspection in Everett typically runs $200-$500 depending on the level of documentation needed. Signs to watch for include a roaring sound, popping, dense smoke, or an unusually hot flue pipe; if you suspect a fire, get everyone out and call the fire department before you call us.

What Heat Damage Looks Like

Creosote that has bubbled and turned puffy, cracked tiles, and discolored metal at the top of the flue are the classic heat-damage signs. We check each one with a camera so nothing is assumed.

Liner Replacement After a Fire

When a chimney fire has compromised the original tile, relining with a stainless DuraFlex system restores a continuous, sealed flue. We size the liner to the appliance so draft stays correct after the swap.

Level 2 Chimney Inspection

A Level 2 chimney inspection is the documented, camera-based inspection that goes beyond a basic visual check, and it’s the level most real-estate transactions and post-event situations call for. You need one when a home is being sold or bought, after a chimney fire or an earthquake, when you’ve changed the appliance or fuel type, or when a Level 1 look turns up something that needs a closer view. We run a camera through the flue, check all accessible portions of the chimney interior and exterior, and produce a written report with photos and findings. Brands matter here as much as anywhere, which is why we work with HeatShield, Olympia Chimney, and Copperfield for the components that show up in the repair plan. A Level 2 inspection in Everett typically runs $250-$500 depending on access and roof conditions. The written estimate sets the final price.

Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (888) 545-1163

When Level 2 Is Required

Property transfers, appliance changes, and post-fire situations are the usual triggers for a Level 2. If you’re unsure which level you need, describe the situation and we’ll tell you plainly.

Camera and Documentation

We record what the camera sees and hand you a report with photos, findings, and repair recommendations. It’s documentation you can share without calling us back to explain it.

Chimney Leak

A chimney leak is water getting into the chimney system, usually at the crown, the flashing, or the masonry itself, and it’s the leading cause of chimney deterioration in a wet climate like Everett’s. You need help when you see water stains on the ceiling near the chimney, rust on the firebox or damper, crumbling mortar, or efflorescence (white powder) on the exterior brick. We track the leak to its source rather than sealing everything and hoping, checking the crown, the flashing and counter-flashing, the brick and mortar joints, and the cap. Weatherproofing and exterior protection with Gelco and Famco products is part of the fix, so the work addresses what you can’t see and what weather will eventually expose. Chimney leak diagnosis and repair in Everett typically runs $300-$900 depending on the source and extent. The written estimate sets the final price.

Chasing the Source

Water travels, so a stain on the ceiling doesn’t always point to the spot where the leak starts. We check the crown, flashing, masonry, and cap in sequence rather than guessing.

Professional chimney sweep performing a thorough fireplace inspection and cleaning in Everett, WA

Weatherproofing the Exterior

Once the source is found, we treat the exterior with Gelco and Famco products that protect the masonry and keep water out. It’s the difference between patching a symptom and stopping the cause.

Chimney Camera Inspection

A chimney camera inspection runs a video camera down the flue to see what no one can see from the hearth, and it’s the most reliable way to catch liner damage before it becomes a repair. You need one whenever the liner’s condition is unknown, after a fire or a chimney leak, when you’re buying or selling a home, or when a draft or smoke problem has no obvious cause. We record the run, look for cracks, gaps, offsets, and blockages, and show you the footage so you can see exactly what we’re seeing. That footage is why our recommendations are evidence-based: nothing gets sold to you that isn’t in the video. A camera inspection in Everett typically runs $200-$450 depending on access and flue length. The written estimate sets the final price. If you want the cleaning and inspection together, our chimney sweep Everett service covers both in one visit.

Want to talk it through?Free estimate, price agreed before work starts
Call (888) 545-1163

What the Camera Reveals

The camera shows tile cracks, joint gaps, offsets, obstructions like nests and debris, and the true condition of the liner walls. It’s the clearest picture of the flue you can get without disassembly.

Footage You Keep

We record the run and share the footage with you so you have a record of the flue’s condition. When a repair is recommended, you can see in the video what we saw.

Brands We Service

We work with the brands chimney specialists trust because the materials behind a repair matter as much as the labor. Olympia Chimney and DuraFlex stainless liner systems are our go-to for relining work, and we know how each system handles heat cycling and the draft demands of different appliances. When a flue needs a sealed, continuous liner, those systems are what we install, not generic substitutes.

HeatShield is the product we use to restore fireboxes and smoke chambers at a structural level, and it’s a meaningfully higher bar than surface-level patching. Copperfield and Famco cover the components and exterior protection that finish the job, and Gelco handles weatherproofing so the masonry stays protected through Everett’s wet season. Whether you have Olympia Chimney, DuraFlex, or any other make, we can help.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Need a price for your chimney cleaning?Free estimate, price agreed before work starts
Call (888) 545-1163

Signs You Need a Pro Right Now

  • Smoke spilling into the room. A fireplace that backs up smoke is a draft or blockage problem, and it’s a reason to stop burning until someone looks at the flue. It usually points to an obstruction, a sizing issue, or a failing smoke chamber.
  • A strong creosote or soot smell between uses. Air moving back down the flue brings creosote smells into the house. It’s often a sign of buildup or draft problems, and it’s worth checking before the next fire.
  • Water stains, rust, or efflorescence. Moisture is getting into the chimney somewhere. Left alone, it works at the masonry and the liner, so it’s worth tracking down early rather than late.
  • Cracked or crumbled masonry and a failing crown. Visible damage on the exterior lets water in and weakens the structure above the roofline. A crown that no longer sheds water sends it straight into the brick.
  • A recent chimney fire or an odd hot smell while burning. Heat damage doesn’t always announce itself. A camera inspection after a fire tells you whether the liner is still safe to use.

Our Process, Step by Step

  1. 1
    Book the visit and describe the issue. Tell us what you’re seeing, smelling, or hearing, and whether this is an annual check, a post-fire look, or a property sale. We match the inspection level to the reason.
  2. 2
    Inspect the appliance and the exterior. We start at the appliance connection, then move to the firebox, damper, and smoke chamber, and check the cap, crown, flashing, and masonry from the roof where accessible.
  3. 3
    Run the camera through the flue. A recorded camera run shows the liner’s true condition. We note cracks, gaps, blockages, and anything else that affects safe operation.
  4. 4
    Review findings with you and show the evidence. We walk you through photos and footage, tell you what can safely wait, and describe what needs attention and why. Nothing is recommended without evidence you can see.
  5. 5
    Provide a written estimate. The estimate lists the work and materials by name so you know what you’re paying for. Repairs use professional-grade brands, and the written estimate sets the final price.

How Much Does Chimney Inspection Cost in Everett?

A basic chimney inspection in Everett typically runs $150-$250, and the price climbs as the level of inspection and access increase. A camera-level or Level 2 inspection with a written report usually runs $250-$500, and when the visit turns into documented findings for a real-estate transaction or an insurer, expect the upper end of that range. Post-fire inspections and leak diagnosis typically run $200-$500 and $300-$900 respectively, depending on what’s found and how much repair is involved.

What affects the price: the inspection level, roof access and the pitch of the roof, whether a camera run is needed, how many flues the chimney has, and the condition of the system. A straightforward single-flue chimney with easy roof access costs less than a multi-flue chimney with a steep roof pitch or a liner that’s already been compromised.

How to avoid overpaying: ask for the level before you book, ask what’s included in the written report, and ask whether the inspection is priced separately from any repair. You shouldn’t be told you need thousands of dollars of liner or masonry work without camera evidence you can see for yourself, and if work can safely wait, we’ll say so.

What’s included: the appliance and firebox check, the exterior where accessible, a camera run, a written report with photos, and an estimate for any recommended repair. The estimate is free and the written estimate sets the final price, so call (888) 545-1163 to book.

Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (888) 545-1163

Our Service Area Near Everett

We serve Everett and the surrounding communities, including Fobes Hill, Bunk Foss, Cathcart, Meadowdale, Clearview, Lake Cassidy, Three Lakes, Lochsloy, Sisco Heights, High Bridge, and Esperance. Most visits in the immediate area can be scheduled quickly, and same-day availability is often possible. If you’re in Fobes Hill or Bunk Foss, the drive is short and the visit books the same way it does in central Everett. Our Everett page covers the city more broadly, and our Fobes Hill and Bunk Foss pages cover the neighborhoods nearby.

Serving Everett, WA – Our Local Coverage Area

We serve Everett and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions About Chimney Inspection in Everett

Schedule Your Chimney Inspection Service in Everett Today

Book a chimney inspection in Everett with a team that shows you the evidence before recommending a repair. We answer 24/7 at (888) 545-1163, with fast dispatch from 7am to 7pm, Sunday through Friday, and same-day visits are often possible. You get a camera look, a written report with photos, and a free no-obligation estimate. Call today.

Written by the team at Chimney Sweep Everett.

Why Everett Chooses Chimney Sweep Everett

We set the standard for chimney inspection in Everett.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Everett

Getting your chimney inspection project started is simple.

1

Call or Request a Free Estimate

Tell us about your chimney inspection project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney inspection pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Everett Customers Say

Trusted by homeowners across Everett and surrounding areas.

★★★★★

"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."

Brooke Padgett
★★★★★

"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."

Wade Rhodes
★★★★★

"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."

Heather Quinn

Ready for Chimney Inspection in Everett?

Call now for a free estimate, or request one below. Licensed, insured, and ready to schedule your free estimate in Everett.

(888) 545-1163

Request a Free Estimate in Everett

Tell us about your chimney inspection needs. We'll get back to you to set up your free estimate.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Local Service Coverage
Call Now - We Answer 24/7